EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Mechanical and Tribological Optimization of High-Entropy (TiVCrMoW)B Ceramics

Pengbo Zhao, Hao Li, Wei Li iD, Jiabin Wang, Tianen Yu, Chen Xu iD, Jinlong Chen, Zhaowu Wang iD, Jiawei Wei, Zhong Wan, Binbin Dong, Zhiyu Min und 1 weitere

Materials · 30.10.2026 · 19 (21) · 4607

DOI: 10.3390/ma19214607 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2026. Verfasst von Pengbo Zhao und 12 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Luoyang Institute of Science and Technology, Luoyang 471023, China. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Henan Province, Henan Provincial Science and Technology Research Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the inherent brittleness and insufficient wear resistance of conventional transition metal monoboride ceramics, as well as the application limitations caused by large interfacial mismatches triggered by adding heterogeneous secondary phases, we prepared (TiVCrMoW)B homology and isostructural high-entropy monoboride ceramics containing compositionally enriched isostructural microregions using spark plasma sintering. This ceramic inherits the orthorhombic Cmcm-type monoboride crystal structure. XRD analysis indicates a single phase within its detection limit, while EDS characterization reveals significant elemental segregation, forming in situ compositionally enriched isostructural microregions that are Ti-, Mo-, and W-rich. The interfaces between these regions are well bonded, and the relative density reaches 94.13%. Relying on this intrinsic microstructural architecture, the material is observed to concurrently improve hardness and toughness under the present testing conditions, achieving a Vickers hardness of 39.95 ± 4.32 GPa under a 0.5 N load and a fracture toughness of 3.39 ± 0.36 MPa·m1/2. Under 10 N reciprocating dry friction conditions, it exhibits stable friction behavior, with a steady-state coefficient of friction maintained at 0.52 and a volume wear rate as low as (1.11 ± 0.4) ×10−6 mm3/(N·m). The wear mechanisms are primarily early-stage abrasive wear, microcrack propagation, and localized layered spalling, with no adhesive wear or brittle fracture observed. The low wear rate arises from the combined effects of lattice distortion induced by high entropy, isostructural compositional-microregion toughening caused by elemental segregation, and fine-grain-induced retardation of microcrack propagation. This work confirms that a homology isostructural compositional-microregion structure architecture can contribute to the concurrent enhancement of hardness, toughness, and wear resistance of high-entropy monoboride ceramics, and provides a promising design strategy for wear-resistant ceramics without external secondary phases based on the high-entropy strategy.

Schlagwörter

Stichwörter der Autor:innen

element segregationhigh-entropy ceramicsisostructuralmonoboridesspark plasma sinteringwear resistance

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Luoyang Institute of Science and Technology, Luoyang 471023, China.
  • Henan Key Laboratory of Green Building Materials Manufacturing and Intelligent Equipment, Luoyang 471023, China.
  • School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China.
  • College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, China.

ORCID-Profile: Wei Li, Chen Xu, Zhaowu Wang

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Program of Henan Province
  • Henan Provincial Science and Technology Research Project
  • Natural Science Foundation of Henan Province
  • Key Scientific Research Program of Hangzhou Municipal Bureau of Science and Technology
  • Heluo Young Elite Scientists Sponsorship Program

Zitieren

APA

Zhao, P., Li, H., Li, W., Wang, J., Yu, T., Xu, C., Chen, J., Wang, Z., Wei, J., Wan, Z., Dong, B., Min, Z., & Wang, H. (2026). Synergistic Mechanical and Tribological Optimization of High-Entropy (TiVCrMoW)B Ceramics. Materials, 19(21), 4607. https://doi.org/10.3390/ma19214607

Vancouver

Zhao P, Li H, Li W, Wang J, Yu T, Xu C, et al. Synergistic Mechanical and Tribological Optimization of High-Entropy (TiVCrMoW)B Ceramics. Materials. 2026;19(21):4607. doi:10.3390/ma19214607

BibTeX
@article{Zhao2026,
  author = {Zhao, Pengbo and Li, Hao and Li, Wei and Wang, Jiabin and Yu, Tianen and Xu, Chen and Chen, Jinlong and Wang, Zhaowu and Wei, Jiawei and Wan, Zhong and Dong, Binbin and Min, Zhiyu and Wang, Hailong},
  title = {Synergistic Mechanical and Tribological Optimization of High-Entropy (TiVCrMoW)B Ceramics},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4607},
  doi = {10.3390/ma19214607}
}
Kostenlos starten →