Study on Multi-Pass Steel Ball Push Bending Process of 5A02 Aluminum Alloy Thin-Walled Tube with 0.8 D Bending Radius
Materials · 30.10.2026 · 19 (21) · 4604
DOI: 10.3390/ma19214604 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2026. Verfasst von Yougen Dong und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Aviation Manufacturing and Mechanical Engineering, Nanchang Hangkong University, Nanchang 330063, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Jiangxi Province.
Abstract (Originalsprache)
During multi-pass push-bending, the supporting behavior at process interfaces may induce microscopic surface damage and thereby adversely affect the bonding performance of subsequent surface treatments. To address the excessive cross-sectional ovality in conventional tube push-bending and the difficulty of recovering liquid filling media, this work proposes a novel multi-pass push-bending process using discrete steel balls as filling and supporting media, with 5A02 aluminum alloy tubes of Φ32 × 1 mm selected as the research object. A corresponding finite element model is established, and orthogonal simulations are performed to optimize the parameters, including steel ball diameter, tube blank length, and tube–die friction condition. The results show that a steel ball diameter close to the inner diameter of the tube blank provides stronger internal support and remarkably restrains cross-sectional distortion. A shorter tube blank facilitates material flow in the bending zone and alleviates excessive inner-wall thickening. Reducing the tube blank–die friction effectively suppresses excessive outer-wall thinning. While achieving favorable macroscopic forming quality, the proposed process also exhibits promising potential for reducing surface scratches and improving surface integrity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aviation Manufacturing and Mechanical Engineering, Nanchang Hangkong University, Nanchang 330063, China.
- Demonstration Center for Engineering Training Education, Nanchang Hangkong University, Nanchang 330063, China.
Förderung
- National Natural Science Foundation of China
- Key Research and Development Program of Jiangxi Province
Zitieren
APA
Dong, Y., Xu, X., Xu, H., Li, Y., Fan, Y., & Xie, J. (2026). Study on Multi-Pass Steel Ball Push Bending Process of 5A02 Aluminum Alloy Thin-Walled Tube with 0.8 D Bending Radius. Materials, 19(21), 4604. https://doi.org/10.3390/ma19214604
Vancouver
Dong Y, Xu X, Xu H, Li Y, Fan Y, Xie J. Study on Multi-Pass Steel Ball Push Bending Process of 5A02 Aluminum Alloy Thin-Walled Tube with 0.8 D Bending Radius. Materials. 2026;19(21):4604. doi:10.3390/ma19214604
BibTeX
@article{Dong2026,
author = {Dong, Yougen and Xu, Xuefeng and Xu, Haoxing and Li, Yanfang and Fan, Yubin and Xie, Jun},
title = {Study on Multi-Pass Steel Ball Push Bending Process of 5A02 Aluminum Alloy Thin-Walled Tube with 0.8 D Bending Radius},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4604},
doi = {10.3390/ma19214604}
}
EUVIMED