Combined Effect of Enriched Air-Cooled Blast-Furnace Slag Aggregate and Microsilica-Modified Bitumen on Asphalt Concrete Properties
Materials · 30.10.2026 · 19 (21) · 4598
DOI: 10.3390/ma19214598 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2026. Verfasst von Vyacheslav Kunaev und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Technological Machines and Transport, Karaganda Industrial University, Temirtau 101400, Kazakhstan. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan, Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
Air-cooled blast-furnace slag (ACBFS) is a promising secondary aggregate for asphalt concrete, but its heterogeneous porosity and mechanical properties can limit performance. This study evaluates a combined approach based on selective crushing of ACBFS and modification of bitumen with microsilica. Selective crushing reduced the proportion of weak, highly porous slag particles, while microsilica was added to bitumen at 0, 3, 6, 9, 12, 15, and 18% by mass of bitumen. Asphalt concrete mixtures were assessed by density, water saturation, compressive strength, indirect tensile strength, Marshall stability and flow, water resistance, freeze–thaw resistance, and SEM–EDS analysis. The best overall performance was obtained at 12% microsilica. At this content, compressive strength reached 5.92 MPa, indirect tensile strength 3.15 MPa, Marshall stability 20.10 kN, and the water resistance coefficient 0.81, while compressive strength loss after 50 freeze–thaw cycles decreased to 8.50%. SEM observations showed fewer large interfacial voids and a more continuous aggregate–mastic contact region in the modified mixture, while EDS indicated a more continuous Si distribution. The results show that aggregate enrichment and binder modification can complement each other in improving ACBFS-based asphalt concrete.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Technological Machines and Transport, Karaganda Industrial University, Temirtau 101400, Kazakhstan.
- Department of Metallurgy and Material Science, Karaganda Industrial University, Temirtau 101400, Kazakhstan.
- Department of Artificial Intelligence, Karaganda Industrial University, Temirtau 101400, Kazakhstan.
- Department of Science and Innovations, Karaganda Industrial University, Temirtau 101400, Kazakhstan.
- Faculty of Artificial Intelligence, Universiti Teknologi Malaysia, Kuala Lumpur 54100, Malaysia.
- Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Kuala Lumpur 54100, Malaysia.
ORCID-Profile: Vyacheslav Kunaev, Gulzhainat Akhmetova, Ilgar Tavshanov, Alibek Batyrbek, Mohamad Syazli Fathi, Mohamad Zaki Hassan
Förderung
- Ministry of Science and Higher Education of the Republic of Kazakhstan
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Kunaev, V., Akhmetova, G., Tavshanov, I., Batyrbek, A., Charnyi, D., Zhautikov, B., Fathi, M. S., Hassan, M. Z., & Ospanova, A. (2026). Combined Effect of Enriched Air-Cooled Blast-Furnace Slag Aggregate and Microsilica-Modified Bitumen on Asphalt Concrete Properties. Materials, 19(21), 4598. https://doi.org/10.3390/ma19214598
Vancouver
Kunaev V, Akhmetova G, Tavshanov I, Batyrbek A, Charnyi D, Zhautikov B, et al. Combined Effect of Enriched Air-Cooled Blast-Furnace Slag Aggregate and Microsilica-Modified Bitumen on Asphalt Concrete Properties. Materials. 2026;19(21):4598. doi:10.3390/ma19214598
BibTeX
@article{Kunaev2026,
author = {Kunaev, Vyacheslav and Akhmetova, Gulzhainat and Tavshanov, Ilgar and Batyrbek, Alibek and Charnyi, Dmitriy and Zhautikov, Bakhyt and Fathi, Mohamad Syazli and Hassan, Mohamad Zaki and Ospanova, Ayaulym},
title = {Combined Effect of Enriched Air-Cooled Blast-Furnace Slag Aggregate and Microsilica-Modified Bitumen on Asphalt Concrete Properties},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4598},
doi = {10.3390/ma19214598}
}
EUVIMED