EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Two-Step Method for Integrating Triply Periodic Minimal Surface Structures of Different Types with Large Differences in Pore Size

Nan Yang iD, Yongyi Huang, Wanyu Hu, Aoran Feng

Materials · 30.10.2026 · 19 (21) · 4596

DOI: 10.3390/ma19214596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2026. Verfasst von Nan Yang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Intelligent Manufacturing Key Laboratory of Ministry of Education, College of Engineering, Shantou University, Shantou 515063, China. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Provincial Natural Science Foundation, Key Project of Guangdong Provincial Department of Education, 2025 Li Ka Shing Foundation STU-GTIIT (Guangdong Technion-Israel Institute of Technology).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the integration of triply periodic minimal surface (TPMS) structures with different types and large differences in pore size, a two-step transition method is proposed. Taking P-type and G-type TPMSs as examples, the unit cell number of the P-structure is gradually adjusted to the target size first, and then a smooth transition between P- and G-structures with the same unit number is realized via a Cauchy linear weight function, eliminating geometric defects caused by direct hybridization. Samples are modeled by Mathematica 11.2 and fabricated via selective laser sintering of nylon powder. The experimental results show that the transition zone is defect-free, the volume fraction is close to the designed value, and the structural stiffness is increased by ~40% compared with the traditional direct transition method. This work provides an effective strategy for designing and manufacturing high-performance gradient porous structures via additive manufacturing.

Schlagwörter

Stichwörter der Autor:innen

TPMS structuresadditive manufacturinggradient porous structurestructural stiffnesstwo-step method

Autor:innen und Institutionen

  • Intelligent Manufacturing Key Laboratory of Ministry of Education, College of Engineering, Shantou University, Shantou 515063, China.

ORCID-Profile: Nan Yang

Förderung

  • Guangdong Provincial Natural Science Foundation
  • Key Project of Guangdong Provincial Department of Education
  • 2025 Li Ka Shing Foundation STU-GTIIT (Guangdong Technion-Israel Institute of Technology)
  • 2025 Li Ka Shing Foundation STU-GTIIT (Guangdong Technion-Israel Institute of Technology) Joint Research Grant

Zitieren

APA

Yang, N., Huang, Y., Hu, W., & Feng, A. (2026). Two-Step Method for Integrating Triply Periodic Minimal Surface Structures of Different Types with Large Differences in Pore Size. Materials, 19(21), 4596. https://doi.org/10.3390/ma19214596

Vancouver

Yang N, Huang Y, Hu W, Feng A. Two-Step Method for Integrating Triply Periodic Minimal Surface Structures of Different Types with Large Differences in Pore Size. Materials. 2026;19(21):4596. doi:10.3390/ma19214596

BibTeX
@article{Yang2026,
  author = {Yang, Nan and Huang, Yongyi and Hu, Wanyu and Feng, Aoran},
  title = {Two-Step Method for Integrating Triply Periodic Minimal Surface Structures of Different Types with Large Differences in Pore Size},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4596},
  doi = {10.3390/ma19214596}
}
Kostenlos starten →