EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Natural Perlite Fineness Variation on the Physico-Mechanical Properties of Mortars

Mustapha Lotfi Ghomari iD, Hamid Khelafi, El Hadj Kadri, Ramdane Chihaoui, Abdelwahhab Khatir iD

Materials · 29.10.2026 · 19 (21) · 4590

DOI: 10.3390/ma19214590 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Mustapha Lotfi Ghomari und 4 weiteren Autor:innen. Beteiligte Einrichtung: LMST Laboratory, Civil Engineering Department, University of Sciences and Technologies Mohamed Boudiaf of Oran (USTO-MB), El-Mnaouer, Oran 31000, Alg…. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of natural perlite fineness on the physical and mechanical properties of cement mortars. Natural perlite was ground for 2, 4, and 6 h, producing Blaine fineness values of 3040, 5900, and 8030 cm2/g, respectively. Standardized mortars were prepared by replacing 15% and 25% of the cement mass with perlite. The effects of perlite fineness were evaluated through superplasticizer dosage, semi-adiabatic calorimetry, and compressive strength at curing ages from 1 to 180 days, and water-accessible porosity at 180 days. The results showed that perlite fineness influenced the fresh and hardened properties of the mortars. Increasing fineness generally reduced the superplasticizer dosage required to achieve the target consistency. Perlite-containing mortars exhibited lower early heat release than the reference mortar, and increasing perlite fineness partially enhanced heat evolution. The finest perlite improved compressive-strength development and produced the lowest water-accessible porosity at both replacement levels, particularly at later ages. These findings demonstrate that natural perlite fineness is an important parameter influencing the physical and mechanical properties of mortars.

Schlagwörter

Stichwörter der Autor:innen

cement mortarcompressive strengthfinenessgrindingheat evolutionnatural perlitesuperplasticizer demandwater-accessible porosity

Autor:innen und Institutionen

  • LMST Laboratory, Civil Engineering Department, University of Sciences and Technologies Mohamed Boudiaf of Oran (USTO-MB), El-Mnaouer, Oran 31000, Algeria.
  • Faculté des Sciences et de la Technologie, Université Ahmed Draia, Adrar 01000, Algeria.
  • Laboratoire L2MGC, Université de Cergy Pontoise, 95031 Cergy Pontoise, France.
  • Laboratory LabMat, National Polytechnic School of Oran Morice Audin of Oran (ENPO), Bp 1523 EL M'NAOUER, Oran 31000, Algeria.
  • LM2SC Laboratory, Civil Engineering Department, University of Sciences and Technologies Mohamed Boudiaf of Oran (USTO-MB), El-Mnaouer, Oran 31000, Algeria.

ORCID-Profile: Mustapha Lotfi Ghomari, Abdelwahhab Khatir

Zitieren

APA

Ghomari, M. L., Khelafi, H., Kadri, E. H., Chihaoui, R., & Khatir, A. (2026). Influence of Natural Perlite Fineness Variation on the Physico-Mechanical Properties of Mortars. Materials, 19(21), 4590. https://doi.org/10.3390/ma19214590

Vancouver

Ghomari ML, Khelafi H, Kadri EH, Chihaoui R, Khatir A. Influence of Natural Perlite Fineness Variation on the Physico-Mechanical Properties of Mortars. Materials. 2026;19(21):4590. doi:10.3390/ma19214590

BibTeX
@article{Ghomari2026,
  author = {Ghomari, Mustapha Lotfi and Khelafi, Hamid and Kadri, El Hadj and Chihaoui, Ramdane and Khatir, Abdelwahhab},
  title = {Influence of Natural Perlite Fineness Variation on the Physico-Mechanical Properties of Mortars},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4590},
  doi = {10.3390/ma19214590}
}
Kostenlos starten →