EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transformation Behavior of Fe, V and Ti in Pre–Reduced Vanadium–Titanium Magnetite During Electric Furnace Smelting

Conglin Yao, Baolin Tan, Bing Hu, Fuqiang Zheng, Yong Yu, Pengbo Wang

Materials · 29.10.2026 · 19 (21) · 4582

DOI: 10.3390/ma19214582 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Conglin Yao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Zhongye Changtian International Engineering Co., Ltd., Changsha 410205, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Yunnan Fundamental Research Projects, Zhongye Changtian International Engineering Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vanadium–titanium magnetite is an important global strategic resource, with proven reserves exceeding 40 billion tons. Currently, the direct reduction–electric furnace route is regarded as the most promising process for VTM treatment. However, the transformation mechanisms of Fe, V and Ti remain insufficiently understood, constraining industrial implementation. In this study, the transformations of Fe, V and Ti during reduction smelting were systematically clarified, and the effects of MgO, CaO and semi–coke were evaluated. MgO addition promoted the formation of MgAl2O4, (Ti,V)2O3 and (Mg,V)xTi3–xO5, hindering slag–alloy separation. In contrast, with CaO as a modifier, FeTiO3 in the raw material was reduced by C to yield Fe and VxTi3–xO5, which was further reduced to (Ti,V)2O3. The added CaO reacted with (Ti,V)2O3 to generate CaTiO3 and (VxOy), chemically dissolved V. Concurrently, CaO reacted with silicates to produce CaAl2Si2O8, facilitating the sedimentation of the Fe–V alloy. Under the optimal conditions of 1873 K, a holding time of 20 min and additions of 2.5 wt% semi–coke and 12 wt% CaO, the recoveries of V, Fe and Ti reached 94.56%, 99.61% and 98.87%. In comparison, conventional processes typically achieved Fe and V recoveries of only approximately 90% and 70%. These findings support the industrial application of pre–reduced VTM.

Schlagwörter

Stichwörter der Autor:innen

V and Tidirect reduction–electric furnace processefficient resource utilizationtransformation mechanisms of Fevanadium–titanium magnetite

Autor:innen und Institutionen

  • Zhongye Changtian International Engineering Co., Ltd., Changsha 410205, China.
  • Engineering Research Center of Metallurgical Energy Conservation and Emission Reduction, Ministry of Education, School of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 65009…
  • Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong, China.

Förderung

  • National Natural Science Foundation of China
  • Yunnan Fundamental Research Projects
  • Zhongye Changtian International Engineering Co., Ltd.

Zitieren

APA

Yao, C., Tan, B., Hu, B., Zheng, F., Yu, Y., & Wang, P. (2026). Transformation Behavior of Fe, V and Ti in Pre–Reduced Vanadium–Titanium Magnetite During Electric Furnace Smelting. Materials, 19(21), 4582. https://doi.org/10.3390/ma19214582

Vancouver

Yao C, Tan B, Hu B, Zheng F, Yu Y, Wang P. Transformation Behavior of Fe, V and Ti in Pre–Reduced Vanadium–Titanium Magnetite During Electric Furnace Smelting. Materials. 2026;19(21):4582. doi:10.3390/ma19214582

BibTeX
@article{Yao2026,
  author = {Yao, Conglin and Tan, Baolin and Hu, Bing and Zheng, Fuqiang and Yu, Yong and Wang, Pengbo},
  title = {Transformation Behavior of Fe, V and Ti in Pre–Reduced Vanadium–Titanium Magnetite During Electric Furnace Smelting},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4582},
  doi = {10.3390/ma19214582}
}
Kostenlos starten →