Analysis of Bonding Slip Performance Between Novel Epoxy Resin Concrete and Reinforcement
Materials · 29.10.2026 · 19 (21) · 4580
DOI: 10.3390/ma19214580 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Jingwei Cai und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory Comprehensive Energy Saving of Cold Regions Architecture of Ministry of Education, Jilin Jianzhu University, Changchun 130119, China. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Provincial Department of Science and Technology Development, Jilin Provincial Department of Science and Technology Development Plan Project.
Abstract (Originalsprache)
This study systematically investigated the bonding behavior between novel epoxy resin concrete (ERC) and ribbed HRB400 steel bars through central pull-out tests. A total of 30 groups of specimens were designed to evaluate the effects of concrete strength, concrete cover thickness, bar diameter, anchorage length, and stirrup ratio on bond performance. The results indicate that increasing ERC strength significantly enhances the bond with reinforcement, primarily by improving chemical adhesion and mechanical interlock, while inhibiting the development of internal cracks. Concrete cover thickness was found to have a significant impact on bond strength; increasing the cover within a reasonable range effectively prevented splitting failure. Enlarging the bar diameter from 16 mm to 20 mm improved bond strength, but the benefit diminished beyond 20 mm. A negative correlation was observed between anchorage length and ultimate bond strength. Bond stress was unevenly distributed along the anchorage length, with higher stresses at both ends and lower stress in the middle region. Compared with conventional concrete of equivalent grade, the bond performance between ERC and steel bars was improved by 79%. These findings provide a theoretical basis for the design and application of ERC in engineering structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory Comprehensive Energy Saving of Cold Regions Architecture of Ministry of Education, Jilin Jianzhu University, Changchun 130119, China.
- School of Civil Engineering, Jilin Jianzhu University, Changchun 130119, China.
- National Engineering Research Center of Biomaterials, Nanjing Forestry University, Nanjing 210037, China.
- Changchun Urban Construction and Maintenance Group Co., Ltd., Changchun 130062, China.
ORCID-Profile: Jingwei Cai, Yanyan Liu
Förderung
- Jilin Provincial Department of Science and Technology Development
- Jilin Provincial Department of Science and Technology Development Plan Project
Zitieren
APA
Cai, J., Yin, S., Zhu, Y., Liu, Y., Yin, X., & Li, G. (2026). Analysis of Bonding Slip Performance Between Novel Epoxy Resin Concrete and Reinforcement. Materials, 19(21), 4580. https://doi.org/10.3390/ma19214580
Vancouver
Cai J, Yin S, Zhu Y, Liu Y, Yin X, Li G. Analysis of Bonding Slip Performance Between Novel Epoxy Resin Concrete and Reinforcement. Materials. 2026;19(21):4580. doi:10.3390/ma19214580
BibTeX
@article{Cai2026,
author = {Cai, Jingwei and Yin, Shengwei and Zhu, Yi and Liu, Yanyan and Yin, Xinsheng and Li, Guanjie},
title = {Analysis of Bonding Slip Performance Between Novel Epoxy Resin Concrete and Reinforcement},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4580},
doi = {10.3390/ma19214580}
}
EUVIMED