EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Evolution and Structure–Property Relationships of Fe79Zr6Si14Cu1 Coatings with Low GFA Produced by Atmospheric Plasma Spraying

Inez Kredowska iD, Wirginia Pilarczyk iD, Aleksandra Małachowska iD, Paweł Sokołowski iD, Katarzyna Młynarek-Żak, Paweł M Nuckowski iD

Materials · 29.10.2026 · 19 (21) · 4573

DOI: 10.3390/ma19214573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Inez Kredowska und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Silesian University of Technology, Ul. Akademicka 2A, 44-100 Gliwice, Poland. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The phase evolution of low-glass-forming-ability (low-GFA) Fe-Zr-Si alloys under atmospheric plasma spraying (APS) conditions remains insufficiently understood. In the present study, Fe79Zr6Si14Cu1 coatings were deposited by APS in order to investigate the influence of spray distance on microstructural development and structure–property relationships. Despite the rapid solidification conditions associated with APS, all coatings exhibited predominantly crystalline multiphase microstructures composed of α-Fe(Si) and Fe-Zr intermetallic phases, with no detectable amorphous fraction in the XRD patterns. The coatings developed a characteristic lamellar morphology with porosity ranging from 2.2 to 4.9%, strongly dependent on spray distance and particle thermal history. Increasing spray distance promoted higher hardness and improved wear resistance but simultaneously deteriorated corrosion resistance due to increased porosity and interlamellar defect population. Among the investigated conditions, the coating deposited at 90 mm exhibited the most favourable balance of hardness, wear resistance, and electrochemical behaviour owing to its relatively dense and cohesive microstructure. The results demonstrate that phase evolution in low-GFA Fe-Zr-Si-Cu alloys processed by APS is governed not only by rapid cooling rates but also by splat-based solidification, repeated thermal cycling, and heterogeneous nucleation during coating build-up.

Schlagwörter

Stichwörter der Autor:innen

Fe-based alloy coatingsatmospheric plasma sprayingcorrosion resistancelow glass-forming abilitymicrostructure–property relationshipstribological behaviour

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Silesian University of Technology, Ul. Akademicka 2A, 44-100 Gliwice, Poland.
  • Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Wyb. Wyspiańskiego 27, 50-370 Wrocław, Poland.

ORCID-Profile: Inez Kredowska, Wirginia Pilarczyk, Aleksandra Małachowska, Paweł Sokołowski, Paweł M Nuckowski

Zitieren

APA

Kredowska, I., Pilarczyk, W., Małachowska, A., Sokołowski, P., Młynarek-Żak, K., & Nuckowski, P. M. (2026). Phase Evolution and Structure–Property Relationships of Fe79Zr6Si14Cu1 Coatings with Low GFA Produced by Atmospheric Plasma Spraying. Materials, 19(21), 4573. https://doi.org/10.3390/ma19214573

Vancouver

Kredowska I, Pilarczyk W, Małachowska A, Sokołowski P, Młynarek-Żak K, Nuckowski PM. Phase Evolution and Structure–Property Relationships of Fe79Zr6Si14Cu1 Coatings with Low GFA Produced by Atmospheric Plasma Spraying. Materials. 2026;19(21):4573. doi:10.3390/ma19214573

BibTeX
@article{Kredowska2026,
  author = {Kredowska, Inez and Pilarczyk, Wirginia and Małachowska, Aleksandra and Sokołowski, Paweł and Młynarek-Żak, Katarzyna and Nuckowski, Paweł M},
  title = {Phase Evolution and Structure–Property Relationships of Fe79Zr6Si14Cu1 Coatings with Low GFA Produced by Atmospheric Plasma Spraying},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4573},
  doi = {10.3390/ma19214573}
}
Kostenlos starten →