EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Data-Driven Design and Optimisation of Eutectic-Assisted Alumina Ceramics Using RSM and Symbolic Regression

Salman Saeidlou iD

Materials · 29.10.2026 · 19 (21) · 4561

DOI: 10.3390/ma19214561 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Salman Saeidlou. Beteiligte Einrichtung: Sustainable Engineering and the Built Environment, Canterbury Christ Church University, Canterbury CT11QU, UK. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lowering the processing temperature of alumina while retaining mechanical performance requires control of additive chemistry and powder processing. This study examines CaO–SiO2–Al2O3-assisted alumina through a 27-condition dataset, response surface methodology (RSM) and symbolic regression using GPTIPS 2.0. Sintering temperature, coarse-alumina mass fraction, lubricant content and additive content are the input variables; flexural strength and density are performance responses, while shrinkage is treated as a dimensional response. The highest tabulated strength is 173.52 MPa at 1550 °C, with a density of 3.610 g/cm3. GPTIPS evaluation-subset variation explained is 89.55%, 87.39% and 81.24% for strength, density and shrinkage, respectively. These statistics describe model selection rather than independent predictive validation. A comparison with published reduced-cubic RSM models gives strength and density R2 values of 0.9825 and 0.9934, whereas full-quadratic models yield lower adjusted R2 values. The results demonstrate the influence of model specification on fitted agreement and distinguish the maximum tabulated response from a constrained literature optimum. The combined analysis provides a basis for assessing processing–property relationships while recognising the dimensional and service-performance trade-offs associated with liquid-phase-assisted sintering.

Schlagwörter

Stichwörter der Autor:innen

alumina ceramicseutectic additivesgenetic programmingliquid-phase sinteringmechanical propertiesprocess optimisationresponse surface methodologysymbolic regression

Autor:innen und Institutionen

  • Sustainable Engineering and the Built Environment, Canterbury Christ Church University, Canterbury CT11QU, UK.

ORCID-Profile: Salman Saeidlou

Zitieren

APA

Saeidlou, S. (2026). Data-Driven Design and Optimisation of Eutectic-Assisted Alumina Ceramics Using RSM and Symbolic Regression. Materials, 19(21), 4561. https://doi.org/10.3390/ma19214561

Vancouver

Saeidlou S. Data-Driven Design and Optimisation of Eutectic-Assisted Alumina Ceramics Using RSM and Symbolic Regression. Materials. 2026;19(21):4561. doi:10.3390/ma19214561

BibTeX
@article{Saeidlou2026,
  author = {Saeidlou, Salman},
  title = {Data-Driven Design and Optimisation of Eutectic-Assisted Alumina Ceramics Using RSM and Symbolic Regression},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4561},
  doi = {10.3390/ma19214561}
}
Kostenlos starten →