Development of a Coal-like Material for Microwave Fracturing: Dielectric Characteristics, Thermal Response, and Mechanical Properties
Materials · 28.10.2026 · 19 (21) · 4548
DOI: 10.3390/ma19214548 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.10.2026. Verfasst von Nan Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mines, China University of Mining and Technology, Xuzhou 221116, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
Microwave-induced borehole fracturing of coal seams for pressure relief and permeability enhancement provides a novel approach for preventing coal and gas outburst disasters. However, large-sized natural coal samples suffer from sampling difficulties, complex processing, and poor repeatability, which restrict further related research. In this study, a 2.45 GHz microwave irradiation system with an adjustable power range of 0–2 kW was used, and the specimens were irradiated at a power of 1 kW. Taking bituminous coal as the target, this study used coal powder, river sand, cement, and iron powder to determine and verify the optimal mixing ratio of a coal-like material through orthogonal experiments and multiple linear regression analysis. Taking the imaginary part of the complex permittivity, the temperature non-uniformity coefficient, the uniaxial compressive strength, and the elastic modulus as core indicators, and controlling the error of each indicator relative to the target coal sample within 10%, the optimal ratio was determined as an aggregate-binder ratio of 1.45:1, a coal-to-sand mass ratio of 4:1, and an iron powder mass fraction of 0.75%. The coal-like specimens prepared accordingly showed good consistency with the target coal sample in complex dielectric properties, microwave non-uniform temperature rise characteristics, and mechanical properties, providing a suitable coal-like material for large-scale open-ended microwave borehole fracturing experiments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mines, China University of Mining and Technology, Xuzhou 221116, China.
- School of Safety Engineering, China University of Mining and Technology, Xuzhou 221116, China.
- Key Laboratory of Xinjiang Coal Resources Green Mining, Ministry of Education, Xinjiang Institute of Engineering, Urumqi 830023, China.
- Xinjiang Key Laboratory of Coal-bearing Resources Exploration and Exploitation, Xinjiang Institute of Engineering, Urumqi 830023, China.
- Xinjiang Engineering Research Center of Green Intelligent Coal Mining, Xinjiang Institute of Engineering, Urumqi 830023, China.
- School of Resources and Safety Engineering, Chongqing University, Chongqing 400044, China.
ORCID-Profile: Luchang Xiong
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Yang, N., Wang, Z., Hu, G., Duan, H., Xiong, L., Wang, H., & Yang, P. (2026). Development of a Coal-like Material for Microwave Fracturing: Dielectric Characteristics, Thermal Response, and Mechanical Properties. Materials, 19(21), 4548. https://doi.org/10.3390/ma19214548
Vancouver
Yang N, Wang Z, Hu G, Duan H, Xiong L, Wang H, et al. Development of a Coal-like Material for Microwave Fracturing: Dielectric Characteristics, Thermal Response, and Mechanical Properties. Materials. 2026;19(21):4548. doi:10.3390/ma19214548
BibTeX
@article{Yang2026,
author = {Yang, Nan and Wang, Zhenfan and Hu, Guozhong and Duan, Haoran and Xiong, Luchang and Wang, Hongtu and Yang, Pan},
title = {Development of a Coal-like Material for Microwave Fracturing: Dielectric Characteristics, Thermal Response, and Mechanical Properties},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4548},
doi = {10.3390/ma19214548}
}
EUVIMED