EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Electrical Responses and Damage Evolution of Compacted Machine-Made Snow

Xuan Chen, Enzhao Xiao, Jiashi Li, Jinli Wang, Wenkui Feng, Xiaoqiang Dong

Materials · 27.10.2026 · 19 (21) · 4511

DOI: 10.3390/ma19214511 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.10.2026. Verfasst von Xuan Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Science and Technology Innovation Leading Talent Project of the Sanjin Talents Program, the Graduate Education Innovation Program of Shanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The relationship between electrical change and load-bearing deterioration remains unclear for dense compacted snow. This study combines full-factorial uniaxial compression tests with concurrent electrical measurements to examine the effects of temperature, density, and loading rate on compacted machine-made snow. Densification increased peak strength, but the magnitude of this gain depended on temperature and loading rate. At −30 °C and 15 mm/min, increasing density from 0.50 to 0.70 g/cm3 raised peak strength from 1.072 to 2.544 MPa and reduced initial process apparent resistivity by 62.6%. Cooling also strengthened the snow but increased initial apparent resistivity. Faster loading reduced peak strain, whereas strength varied nonmonotonically. These responses can be interpreted through competition between contact strengthening, stress redistribution, and bond failure. The strain separation between stress peaks and resistivity minima is consistent with contact adjustment continuing during mechanical softening. A peak-referenced Weibull relation described local post-peak softening with a root-mean-square error of 0.041 MPa and R2 of 0.920. Adding a nonnegative resistivity rebound term did not improve the local fit. The results distinguish electrical state evolution from mechanical capacity loss and provide a basis for joint assessment of strength, deformation, and resistivity in compacted snow pavements.

Schlagwörter

Stichwörter der Autor:innen

compacted machine-made snowlow-temperature uniaxial compressionmechanical propertiesprocess apparent resistivitysnow mechanics

Autor:innen und Institutionen

  • College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
  • R & D Division of Polar Snow and Ice Runways, Polar Research Institute of China, Shanghai 200129, China.
  • Engineering Management Department, Shaanxi Hydrogen Energy New Energy Co., Ltd., Yulin 719003, China.
  • School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China.

Förderung

  • the National Natural Science Foundation of China
  • the Science and Technology Innovation Leading Talent Project of the Sanjin Talents Program
  • the Graduate Education Innovation Program of Shanxi Province
  • National Natural Science Foundation of China

Zitieren

APA

Chen, X., Xiao, E., Li, J., Wang, J., Feng, W., & Dong, X. (2026). Mechanical and Electrical Responses and Damage Evolution of Compacted Machine-Made Snow. Materials, 19(21), 4511. https://doi.org/10.3390/ma19214511

Vancouver

Chen X, Xiao E, Li J, Wang J, Feng W, Dong X. Mechanical and Electrical Responses and Damage Evolution of Compacted Machine-Made Snow. Materials. 2026;19(21):4511. doi:10.3390/ma19214511

BibTeX
@article{Chen2026,
  author = {Chen, Xuan and Xiao, Enzhao and Li, Jiashi and Wang, Jinli and Feng, Wenkui and Dong, Xiaoqiang},
  title = {Mechanical and Electrical Responses and Damage Evolution of Compacted Machine-Made Snow},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4511},
  doi = {10.3390/ma19214511}
}
Kostenlos starten →