EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Origin of Magnetic Properties in Grain-Oriented Silicon Steel: Shear Band Angle Control of Intraband Lattice Rotation

Sifei Cheng iD, Yuhui Sha, Fang Zhang iD, Gengsheng Cao, Zhangchen Xue, Liang Zuo iD

Materials · 23.10.2026 · 19 (21) · 4465

DOI: 10.3390/ma19214465 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2026. Verfasst von Sifei Cheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The magnetic properties of grain-oriented silicon steel depend on the sharpness of its Goss texture, which is governed by the density of Goss areas formed in cold-rolling shear bands. This density rises with the intraband lattice rotation rate ω, which is governed by the shear band angle θ through the local shear strain tensor. Reported relationships between θ and the intraband Goss density are inconsistent, and how θ influences ω remains unclear. Slip geometry analysis, crystal plasticity calculations and quasi-in situ electron backscatter diffraction (EBSD) were combined to investigate an Fe-3.0 wt.% Si alloy. The results show that the intraband orientation evolution is retarded by the primary slip system 1121¯1¯1, most strongly at the retardation plane Φr = 35.3° + θ. The {111} matrix accordingly divides into locked, escaped and free regions, depending on whether the orientation reaches the //ND fiber within a finite strain. As θ falls from 35° to 17°, ω of the escaped region rises. Quasi-in situ tracking supported the increase in ω as θ decreases. Despite a smaller shear strain (2.82 vs 3.63), the θ = 25° band crossed the //ND fiber, whereas the θ = 30° band had not yet reached the fiber. θ alters both the slip system activity at the retardation plane and where the orientation crosses it. These results provide a crystallographic basis for controlling intraband Goss density.

Schlagwörter

Stichwörter der Autor:innen

Goss texturecrystal plasticitygrain-oriented silicon steellattice rotationmagnetic propertiesquasi-in situ EBSDshear band

Autor:innen und Institutionen

  • Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China.

ORCID-Profile: Sifei Cheng, Fang Zhang, Liang Zuo

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Cheng, S., Sha, Y., Zhang, F., Cao, G., Xue, Z., & Zuo, L. (2026). Microstructural Origin of Magnetic Properties in Grain-Oriented Silicon Steel: Shear Band Angle Control of Intraband Lattice Rotation. Materials, 19(21), 4465. https://doi.org/10.3390/ma19214465

Vancouver

Cheng S, Sha Y, Zhang F, Cao G, Xue Z, Zuo L. Microstructural Origin of Magnetic Properties in Grain-Oriented Silicon Steel: Shear Band Angle Control of Intraband Lattice Rotation. Materials. 2026;19(21):4465. doi:10.3390/ma19214465

BibTeX
@article{Cheng2026,
  author = {Cheng, Sifei and Sha, Yuhui and Zhang, Fang and Cao, Gengsheng and Xue, Zhangchen and Zuo, Liang},
  title = {Microstructural Origin of Magnetic Properties in Grain-Oriented Silicon Steel: Shear Band Angle Control of Intraband Lattice Rotation},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4465},
  doi = {10.3390/ma19214465}
}
Kostenlos starten →