EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sc Microalloying on Interfacial Microstructural Evolution in Al/Mg Bimetallic Composites Fabricated by Lost Foam Compound Casting

Jinxin Liu iD, Taoxiong Guo, Ziwei Peng, Xiaopeng Yu, Lihui Zhang, Xingyu Huang, Wenming Jiang iD

Materials · 22.10.2026 · 19 (21) · 4443

DOI: 10.3390/ma19214443 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.10.2026. Verfasst von Jinxin Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science …. Die Arbeit nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Innovation Program of Hunan Province, grant number.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sc microalloying was introduced into A356 Al inserts to regulate interfacial microstructural evolution in A356/AZ91D bimetallic composites fabricated by lost foam compound casting. Nominal Sc additions of 0, 0.6, 0.9, and 1.2 wt.% were investigated using scanning electron microscopy, energy-dispersive spectroscopy, electron backscatter diffraction, elemental mapping, microstructural size statistics, and Vickers hardness testing. The results showed that Sc addition markedly reduced the interfacial reaction region. The total interface thickness decreased from 1750 μm in the Sc-free specimen to 1069, 1088, and 922 μm at 0.6, 0.9, and 1.2 wt.% Sc, respectively. Among the Sc-containing specimens, 0.6 wt.% Sc produced the most pronounced microstructural refinement, reducing the mean equivalent circular diameter of indexed interfacial microstructural units from 23 to 19 μm and that of Mg2Si from 17 to 14 μm while decreasing the amount of coarse γ-Al12Mg17 dendrites. EBSD revealed no marked change in the major reliably indexed phases or overall preferred orientation after Sc addition, whereas elemental mapping showed discrete Sc-enriched regions rather than a continuous Sc-rich interfacial layer. These results indicate that Al-side Sc microalloying regulates the interface mainly by restricting the expansion of the interfacial reaction region and modifying local solidification and second-phase growth, thereby promoting interface thinning and microstructural refinement.

Schlagwörter

Stichwörter der Autor:innen

Al/Mg bimetallic compositeMg2SiSc microalloyingVickers hardnessinterfacial microstructurelost foam compound casting

Autor:innen und Institutionen

  • State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.

ORCID-Profile: Jinxin Liu, Wenming Jiang

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Innovation Program of Hunan Province, grant number

Zitieren

APA

Liu, J., Guo, T., Peng, Z., Yu, X., Zhang, L., Huang, X., & Jiang, W. (2026). Effect of Sc Microalloying on Interfacial Microstructural Evolution in Al/Mg Bimetallic Composites Fabricated by Lost Foam Compound Casting. Materials, 19(21), 4443. https://doi.org/10.3390/ma19214443

Vancouver

Liu J, Guo T, Peng Z, Yu X, Zhang L, Huang X, et al. Effect of Sc Microalloying on Interfacial Microstructural Evolution in Al/Mg Bimetallic Composites Fabricated by Lost Foam Compound Casting. Materials. 2026;19(21):4443. doi:10.3390/ma19214443

BibTeX
@article{Liu2026,
  author = {Liu, Jinxin and Guo, Taoxiong and Peng, Ziwei and Yu, Xiaopeng and Zhang, Lihui and Huang, Xingyu and Jiang, Wenming},
  title = {Effect of Sc Microalloying on Interfacial Microstructural Evolution in Al/Mg Bimetallic Composites Fabricated by Lost Foam Compound Casting},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4443},
  doi = {10.3390/ma19214443}
}
Kostenlos starten →