EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Heat Input on Microstructure Evolution and High-Cycle Fatigue Behavior of Ti-6Al-4V Fabricated by Wire-Laser Directed Energy Deposition

Zhe Wang, Xi Chen, Meng Jiang iD, Zhijian Lu, Yuan Chen, Xuan Su, Qingfeng Yang, Dequan Yang, Peng He, Yanbin Chen

Materials · 11.09.2026 · 19 (18) · 3885

DOI: 10.3390/ma19183885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.09.2026. Verfasst von Zhe Wang und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Welding & Joining of Materials and Structures, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work examines the response of Ti-6Al-4V fabricated by wire-laser directed energy deposition (DED) to heat inputs between 175 and 350 J/mm. Microstructure, tensile behavior, and rotating-bending fatigue were evaluated. As input increased, the transverse size of columnar prior β grains rose from about 642 to 1079 μm and the mean α-lath width increased from 0.65 to 1.32 μm. The α structure consequently changed from a fine acicular/basketweave form to a coarser lamellar form with clearer colonies. Tensile and yield strengths stayed near 900 and 840 MPa, whereas elongation fell from 14.3% to 10.3%. After a 600 °C, 4 h stress relief, fully reversed fatigue tests were performed at 500 MPa (R = −1). Specimens with 175 J/mm heat input reached about 3 × 107 cycles, while one with 350 J/mm fractured at roughly 1 × 105 cycles. The longer life of H175 coincided with its finer interwoven α structure, closer striations, more secondary cracks, and a more tortuous crack route.

Schlagwörter

Stichwörter der Autor:innen

Ti-6Al-4Vcrack propagationheat inputhigh-cycle fatiguewire-laser DEDα morphology

Autor:innen und Institutionen

  • State Key Laboratory of Precision Welding & Joining of Materials and Structures, Harbin Institute of Technology, Harbin 150001, China.
  • Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, China.
  • Suzhou Research Institute, Harbin Institute of Technology, Suzhou 215128, China.
  • Maxphotonics Co., Ltd., Shenzhen 518125, China.

ORCID-Profile: Meng Jiang

Zitieren

APA

Wang, Z., Chen, X., Jiang, M., Lu, Z., Chen, Y., Su, X., Yang, Q., Yang, D., He, P., & Chen, Y. (2026). Effect of Heat Input on Microstructure Evolution and High-Cycle Fatigue Behavior of Ti-6Al-4V Fabricated by Wire-Laser Directed Energy Deposition. Materials, 19(18), 3885. https://doi.org/10.3390/ma19183885

Vancouver

Wang Z, Chen X, Jiang M, Lu Z, Chen Y, Su X, et al. Effect of Heat Input on Microstructure Evolution and High-Cycle Fatigue Behavior of Ti-6Al-4V Fabricated by Wire-Laser Directed Energy Deposition. Materials. 2026;19(18):3885. doi:10.3390/ma19183885

BibTeX
@article{Wang2026,
  author = {Wang, Zhe and Chen, Xi and Jiang, Meng and Lu, Zhijian and Chen, Yuan and Su, Xuan and Yang, Qingfeng and Yang, Dequan and He, Peng and Chen, Yanbin},
  title = {Effect of Heat Input on Microstructure Evolution and High-Cycle Fatigue Behavior of Ti-6Al-4V Fabricated by Wire-Laser Directed Energy Deposition},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {18},
  pages = {3885},
  doi = {10.3390/ma19183885}
}
Kostenlos starten →