EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Advances in 4D-Printed Shape Memory Polymers from Materials, Mechanisms and Fabrication Techniques to Applications: A Comprehensive Review

Gang Wang, Mengyao Dong, Junfang Shen, Xiangning Zhang, Meiling Du, Donglong Li, Kun Li, Xiaoli Zhang iD, Jingbo Chen

Materials · 11.09.2026 · 19 (18) · 3869

DOI: 10.3390/ma19183869 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 11.09.2026. Verfasst von Gang Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Material Processing and Mold Technology, School of Mechanical Engineering, Chongqing Industry Polytechnic University, Chongqing 401…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 149 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research Program of Chongqing Municipal Education Commission, Doctoral Research Fund of Chongqing Industry Polytechnic University, Natural Science Foundation of Chongqing.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shape memory polymers (SMPs) and their multifunctional composites have become important material systems for 4D printing because they can be processed into structures with programmed deformation and stimulus-responsive actuation. After being fixed in a temporary configuration, SMPs are able to recover their permanent shape when exposed to heat, electric or magnetic fields, and so on. This reversible shape change gives printed SMP structures functions beyond those of conventional static components, making them useful for biomedical devices, flexible electronics, and soft robotics. The performance of 4D-printed SMPs is determined not only by material chemistry but also by the design of the printed architecture and the manner in which external stimuli are applied. This review begins by covering the basic mechanisms that govern shape memory behavior in SMPs, including molecular switching, thermomechanical programming, and stimulus-controlled recovery. On this basis, representative printing methods for SMPs are compared, including stereolithography (SLA), fused deposition modeling (FDM), direct-write printing, and polymer inkjet printing. Recent applications are then considered in areas where programmed shape change has practical value, such as biomedical devices, soft robotics, and flexible electronics. The discussion also identifies unresolved problems in printing resolution, response speed, cyclic stability, structural design, and multifunctional coupling, which remain central barriers to wider use of 4D-printed SMP systems.

Schlagwörter

Stichwörter der Autor:innen

4D printingactuationexcitation responseshape memory polymerssmart materials

Autor:innen und Institutionen

  • Key Laboratory of Material Processing and Mold Technology, School of Mechanical Engineering, Chongqing Industry Polytechnic University, Chongqing 401120, China.
  • School of Intelligent Manufacturing, Luoyang Institute of Science and Technology, Luoyang 471023, China.
  • School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China.

ORCID-Profile: Xiaoli Zhang

Förderung

  • Science and Technology Research Program of Chongqing Municipal Education Commission
  • Doctoral Research Fund of Chongqing Industry Polytechnic University
  • Natural Science Foundation of Chongqing
  • Science and Technology Research Projects of Henan Province

Zitieren

APA

Wang, G., Dong, M., Shen, J., Zhang, X., Du, M., Li, D., Li, K., Zhang, X., & Chen, J. (2026). Advances in 4D-Printed Shape Memory Polymers from Materials, Mechanisms and Fabrication Techniques to Applications: A Comprehensive Review. Materials, 19(18), 3869. https://doi.org/10.3390/ma19183869

Vancouver

Wang G, Dong M, Shen J, Zhang X, Du M, Li D, et al. Advances in 4D-Printed Shape Memory Polymers from Materials, Mechanisms and Fabrication Techniques to Applications: A Comprehensive Review. Materials. 2026;19(18):3869. doi:10.3390/ma19183869

BibTeX
@article{Wang2026,
  author = {Wang, Gang and Dong, Mengyao and Shen, Junfang and Zhang, Xiangning and Du, Meiling and Li, Donglong and Li, Kun and Zhang, Xiaoli and Chen, Jingbo},
  title = {Advances in 4D-Printed Shape Memory Polymers from Materials, Mechanisms and Fabrication Techniques to Applications: A Comprehensive Review},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {18},
  pages = {3869},
  doi = {10.3390/ma19183869}
}
Kostenlos starten →