EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Performance Optimization of an Expansive Backfill Material for Active Roof Contact in End-Wall Mining

Jinxing Lyu, Zhimeng Song, Bao Song, Yiquan Lin, Wen Ma

Materials · 21.08.2026 · 19 (16) · 3556

DOI: 10.3390/ma19163556 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.08.2026. Verfasst von Jinxing Lyu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Geology and Mining Engineering, Xinjiang University, Urumqi 830046, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Xinjiang Uyghur Autonomous Region, Natural Science Foundation of the Key Research and Development of Xinjiang Uygur Autonomous Region.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional cemented backfill used in narrow end-wall mining entries commonly suffers from shrinkage and insufficient roof contact, reducing its support effectiveness. In this study, a solid-waste-based expansive backfill was prepared from mine overburden, ordinary Portland cement, fly ash and hydrogen peroxide. Orthogonal tests were performed to evaluate the effects of fly ash dosage, aggregate-to-binder ratio and hydrogen peroxide dosage on slurry flowability, expansion ratio and compressive strength. The slurry exhibited a flowability of 17.9–24.7 cm and an expansion ratio of 11.23–46.52%, confirming the gas-generating expansion effect of hydrogen peroxide. The aggregate-to-binder ratio was the dominant factor influencing flowability, expansion and 28 d strength. Multi-index optimization identified an optimal mix of 40% fly ash, an aggregate-to-binder ratio of 4:1 and 10% hydrogen peroxide. The optimized backfill showed age-dependent increases in uniaxial compressive strength (UCS) and elastic modulus, with failure evolving from inclined shear to tensile and tensile–shear composite modes. Its shear behavior followed the Mohr–Coulomb criterion, with cohesion of 1.61 MPa and internal friction angle of 30.13°. SEM observations indicated that aggregate skeleton support, cementitious bonding and gas-generating expansion jointly controlled the material performance.

Schlagwörter

Stichwörter der Autor:innen

active roof contactexpansive backfill materialhydrogen peroxidemechanical propertiesmine overburden

Autor:innen und Institutionen

  • School of Geology and Mining Engineering, Xinjiang University, Urumqi 830046, China.
  • School of Mining Engineering, China University of Mining and Technology, Xuzhou 221116, China.

Förderung

  • Science and Technology Department of Xinjiang Uyghur Autonomous Region
  • Natural Science Foundation of the Key Research and Development of Xinjiang Uygur Autonomous Region

Zitieren

APA

Lyu, J., Song, Z., Song, B., Lin, Y., & Ma, W. (2026). Preparation and Performance Optimization of an Expansive Backfill Material for Active Roof Contact in End-Wall Mining. Materials, 19(16), 3556. https://doi.org/10.3390/ma19163556

Vancouver

Lyu J, Song Z, Song B, Lin Y, Ma W. Preparation and Performance Optimization of an Expansive Backfill Material for Active Roof Contact in End-Wall Mining. Materials. 2026;19(16):3556. doi:10.3390/ma19163556

BibTeX
@article{Lyu2026,
  author = {Lyu, Jinxing and Song, Zhimeng and Song, Bao and Lin, Yiquan and Ma, Wen},
  title = {Preparation and Performance Optimization of an Expansive Backfill Material for Active Roof Contact in End-Wall Mining},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3556},
  doi = {10.3390/ma19163556}
}
Kostenlos starten →