EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Polypropylene Fiber Content on the High-Temperature Performance of Steel Slag UHPS

Jing Wang, Zhiwei Yuan iD, Yunlong Zhang iD, Xuesong Qian iD, Xiaolong Qu

Materials · 21.08.2026 · 19 (16) · 3553

DOI: 10.3390/ma19163553 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.08.2026. Verfasst von Jing Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation Science and Engineering, Jilin Jianzhu University, Changchun 130118, China. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Technology Department Program of Jilin Province, Science and Technology Department Program of Jilin Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To solve the problems of explosive spalling and sharp deterioration of mechanical properties of ultra-high performance sprayed concrete (UHPS) under high-temperature conditions during tunnel fires, four groups of specimens with different volume contents (0%, 0.2%, 0.3%, 0.4%) of polypropylene fiber (PPF) were designed based on the optimal mix proportion at room temperature. Multi-gradient high-temperature tests at 20 °C, 200 °C, 400 °C, 600 °C and 800 °C were conducted to explore the effects of PPF on the high-temperature damage evolution and spalling resistance of UHPS. The test results show that no obvious spalling occurs in specimens exposed to temperatures of 400 °C and below. Surface peeling appears in the group without PPF addition at 400 °C, and severe explosive spalling happens in the 0% PPF group at 600 °C to 800 °C, while all PPF-incorporated groups maintain structural integrity. The mass loss rate increases with the rise in temperature and PPF content, reaching 15% in the 0.4% PPF group at 800 °C. In terms of mechanical properties, compressive strength, splitting tensile strength, and flexural strength all rise first and then decline with increasing temperature, and the 0.3% PPF group reaches peak values at 400 °C (compressive strength: 135.95 MPa, splitting tensile strength: 23.24 MPa, flexural strength: 27.42 MPa). Flexural toughness decreases continuously as temperature rises, and the 0.2% PPF group exhibits the best toughness retention. This study clarifies the high-temperature modification effect of PPF on UHPS and its optimal content range, providing important theoretical support and an experimental basis for the fire safety protection design of tunnel lining concrete.

Schlagwörter

Stichwörter der Autor:innen

UHPShigh-temperature resistancemechanical propertiesmicrostructural characteristicssteel slag

Autor:innen und Institutionen

  • School of Transportation Science and Engineering, Jilin Jianzhu University, Changchun 130118, China.
  • Jilin Provincial High Class Highway Construction Bureau, Changchun 130033, China.

ORCID-Profile: Zhiwei Yuan, Yunlong Zhang, Xuesong Qian

Förderung

  • Science Technology Department Program of Jilin Province
  • Science and Technology Department Program of Jilin Province

Zitieren

APA

Wang, J., Yuan, Z., Zhang, Y., Qian, X., & Qu, X. (2026). Effect of Polypropylene Fiber Content on the High-Temperature Performance of Steel Slag UHPS. Materials, 19(16), 3553. https://doi.org/10.3390/ma19163553

Vancouver

Wang J, Yuan Z, Zhang Y, Qian X, Qu X. Effect of Polypropylene Fiber Content on the High-Temperature Performance of Steel Slag UHPS. Materials. 2026;19(16):3553. doi:10.3390/ma19163553

BibTeX
@article{Wang2026,
  author = {Wang, Jing and Yuan, Zhiwei and Zhang, Yunlong and Qian, Xuesong and Qu, Xiaolong},
  title = {Effect of Polypropylene Fiber Content on the High-Temperature Performance of Steel Slag UHPS},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3553},
  doi = {10.3390/ma19163553}
}
Kostenlos starten →