Transforming Residual Microbial Biomass into High-Value Bicomposite Material for Reactive-Dye Removal: Insights from Batch Investigations to Fluidized-Bed Reactor Applications
Materials · 20.08.2026 · 19 (16) · 3534
DOI: 10.3390/ma19163534 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.08.2026. Verfasst von Daniela Suteu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemical Engineering and Environmental Protection "Cristofor Simionescu", "Gheorghe Asachi" Technical University of Iasi, Blvd. Prof. Dimi…. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The development of sustainable adsorbents from industrial biowaste has become an important strategy for reducing the environmental impact of both solid waste generation and wastewater pollution. In this study, residual Saccharomyces pastorianus biomass recovered from the brewing industry was immobilized in a polymeric matrix and evaluated as a bio-composite for the removal of reactive dyes from aqueous media. Orange 16 was selected as the target molecule. Batch biosorption experiments were conducted to identify the optimum operating conditions and to determine the adsorption capacity through Langmuir isotherm analysis. The performance of the biosorbent was subsequently validated under continuous-flow conditions in a fluidized-bed reactor, where the effects of flow rate on column (3.8 and 8.5 mL/min) efficiency were investigated. Experimental breakthrough curves were analyzed using the Clark, Yan, Bohart–Adams, and Yoon–Nelson models, which adequately described the dynamic biosorption process, particularly at the lower flow rate. The best agreement was obtained at a flow rate of 3.8 mL/min, an initial dye concentration of 87 mg/L, and a biosorbent mass of 19.5 g. The developed bio-composite material exhibited efficient dye removal and stable operation, demonstrating that residual brewing biomass can be successfully transformed into a low-cost and sustainable biosorbent suitable for continuous treatment of reactive-dye-containing wastewaters.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Chemical Engineering and Environmental Protection "Cristofor Simionescu", "Gheorghe Asachi" Technical University of Iasi, Blvd. Prof. Dimitrie Mangeron, no. 73, 700050 Iasi, Romania.
- Faculty of Engineering, "Vasile Alecsandri" University of Bacau, 157 Calea Mărăşeşti, 600115 Bacau, Romania.
ORCID-Profile: Lacramioara Rusu, Adrian Catalin Puitel, Ramona-Elena Tataru-Farmus
Zitieren
APA
Suteu, D., Blaga, A. C., Rusu, L., Puitel, A. C., & Tataru-Farmus, R. E. (2026). Transforming Residual Microbial Biomass into High-Value Bicomposite Material for Reactive-Dye Removal: Insights from Batch Investigations to Fluidized-Bed Reactor Applications. Materials, 19(16), 3534. https://doi.org/10.3390/ma19163534
Vancouver
Suteu D, Blaga AC, Rusu L, Puitel AC, Tataru-Farmus RE. Transforming Residual Microbial Biomass into High-Value Bicomposite Material for Reactive-Dye Removal: Insights from Batch Investigations to Fluidized-Bed Reactor Applications. Materials. 2026;19(16):3534. doi:10.3390/ma19163534
BibTeX
@article{Suteu2026,
author = {Suteu, Daniela and Blaga, Alexandra Cristina and Rusu, Lacramioara and Puitel, Adrian Catalin and Tataru-Farmus, Ramona-Elena},
title = {Transforming Residual Microbial Biomass into High-Value Bicomposite Material for Reactive-Dye Removal: Insights from Batch Investigations to Fluidized-Bed Reactor Applications},
journal = {Materials},
year = {2026},
volume = {19},
number = {16},
pages = {3534},
doi = {10.3390/ma19163534}
}
EUVIMED