EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hierarchically Porous Mullite Ceramics Assembled from Ultrathin Nanosheets for High-Temperature Thermal Insulation

Zhongyan Wang, Anran Guo, Xueying Zhang, Jiaomei Ma, Jiachen Liu

Materials · 13.08.2026 · 19 (16) · 3433

DOI: 10.3390/ma19163433 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.08.2026. Verfasst von Zhongyan Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin Universit…. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Tianjin Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mullite porous ceramics show exceptional promise for high-temperature insulation applications. However, the mechanical strength and thermal insulation performance of porous ceramics typically cannot be optimized simultaneously. Herein, we proposed a novel method to overcome this limitation by synthesizing hierarchically porous mullite ceramics assembled from ultrathin two-dimensional nanosheets. A chemical blowing method first synthesized ultrathin mullite nanosheets approximately 2–3 nm thick, which were subsequently assembled into a rigid hierarchical network by gel casting and freeze-drying. The influence of solid content and sintering temperature on the phase composition, microstructure, mechanical properties, and high-temperature thermal stability of porous ceramics was systematically investigated. The results indicate that the 20 wt.% sample sintered at 1200 °C exhibited the best performance. This optimal sample achieved a porosity of 90.75%, a compressive strength of 0.38 MPa, and excellent thermal insulation properties, including a low apparent thermal conductivity of 0.0756 W/(m·K) at room temperature and a back surface temperature of 253.2 °C after exposure to a 1200 °C flame. Crucially, this porous ceramic maintained structural stability up to 1500 °C. This nanosheet assembly strategy successfully reinforced the structural skeleton while inhibiting heat transfer. This strategy has great promise for the fabrication of lightweight porous ceramics designed for extreme environments.

Schlagwörter

Stichwörter der Autor:innen

hierarchical structuremechanical strengthmullite porous ceramicsthermal insulationultrathin nanosheet

Autor:innen und Institutionen

  • Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China.
  • Tianjin Cement Industry Design & Research Institute Co., Ltd., Tianjin 300131, China.

Förderung

  • National Key Research and Development Program of China
  • Tianjin Natural Science Foundation

Zitieren

APA

Wang, Z., Guo, A., Zhang, X., Ma, J., & Liu, J. (2026). Hierarchically Porous Mullite Ceramics Assembled from Ultrathin Nanosheets for High-Temperature Thermal Insulation. Materials, 19(16), 3433. https://doi.org/10.3390/ma19163433

Vancouver

Wang Z, Guo A, Zhang X, Ma J, Liu J. Hierarchically Porous Mullite Ceramics Assembled from Ultrathin Nanosheets for High-Temperature Thermal Insulation. Materials. 2026;19(16):3433. doi:10.3390/ma19163433

BibTeX
@article{Wang2026,
  author = {Wang, Zhongyan and Guo, Anran and Zhang, Xueying and Ma, Jiaomei and Liu, Jiachen},
  title = {Hierarchically Porous Mullite Ceramics Assembled from Ultrathin Nanosheets for High-Temperature Thermal Insulation},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3433},
  doi = {10.3390/ma19163433}
}
Kostenlos starten →