EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning-Driven Prediction and Design Guidance for Asphalt Concrete Using Marshall Stability and Indirect Tensile Strength

Jianglei Xing iD, Xiao Tan iD, Mu Guo, Pengwei Guo, Yuhuan Wang, Dongzhao Jin iD

Materials · 11.08.2026 · 19 (16) · 3408

DOI: 10.3390/ma19163408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.08.2026. Verfasst von Jianglei Xing und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing 210024, China. Die Arbeit nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Basic Research Program of Jiangsu province, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work addresses the simultaneous prediction of Marshall Stability (MS) and Indirect Tensile Strength (ITS) by integrating machine learning models with multi-objective optimization for the preliminary design of asphalt concrete. Based on 389 experimental samples, 15 variables were selected to describe asphalt properties, aggregate gradation, volumetric parameters and fiber characteristics, and four dual-output prediction models were developed. The models were evaluated using 50 Monte Carlo splits. TabICLv2 performed slightly better for MS prediction, with an RMSE of 1.49 ± 0.22 kN and an R2 of 0.85 ± 0.04, whereas TabPFN showed a slight advantage for ITS prediction, achieving an RMSE of 0.23 ± 0.08 MPa and an R2 of 0.91 ± 0.06. Furthermore, Pareto filtering identified nine non-dominated mixtures, and TOPSIS ranking selected the highest-ranked equal-weight compromise mixture, with MS = 15.23 kN and ITS = 3.90 MPa. The results indicate that mineral fibers are more suitable for improving the balanced performance of MS and ITS, carbon fibers are more favorable for improving MS, and plastic fibers are more effective in improving ITS. Finally, a Streamlit-based graphical user interface was developed to enable real-time prediction and MS–ITS trade-off visualization, providing a reference for preliminary mix design of asphalt concrete.

Schlagwörter

Stichwörter der Autor:innen

Marshall stabilityPareto filteringTOPSIS rankingasphalt concreteindirect tensile strengthmachine learning

Autor:innen und Institutionen

  • College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing 210024, China.
  • State Key Laboratory of Water Disaster Prevention, Nanjing 210024, China.
  • Shanghai Research Institute of Building Science Co., Ltd., Shanghai 201108, China.
  • Bartlett School of Sustainable Construction, University College London, London WC1E 6BT, UK.
  • Department of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder, Boulder, CO 80309, USA.
  • Department of Civil, Environmental, and Geospatial Engineering, Michigan Technological University, Houghton, MI 49931, USA.

ORCID-Profile: Jianglei Xing, Xiao Tan, Dongzhao Jin

Förderung

  • National Natural Science Foundation of China
  • Basic Research Program of Jiangsu province
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Xing, J., Tan, X., Guo, M., Guo, P., Wang, Y., & Jin, D. (2026). Machine Learning-Driven Prediction and Design Guidance for Asphalt Concrete Using Marshall Stability and Indirect Tensile Strength. Materials, 19(16), 3408. https://doi.org/10.3390/ma19163408

Vancouver

Xing J, Tan X, Guo M, Guo P, Wang Y, Jin D. Machine Learning-Driven Prediction and Design Guidance for Asphalt Concrete Using Marshall Stability and Indirect Tensile Strength. Materials. 2026;19(16):3408. doi:10.3390/ma19163408

BibTeX
@article{Xing2026,
  author = {Xing, Jianglei and Tan, Xiao and Guo, Mu and Guo, Pengwei and Wang, Yuhuan and Jin, Dongzhao},
  title = {Machine Learning-Driven Prediction and Design Guidance for Asphalt Concrete Using Marshall Stability and Indirect Tensile Strength},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3408},
  doi = {10.3390/ma19163408}
}
Kostenlos starten →