EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Oblique Quasi-Static Indentation and Residual Compressive Behavior of Hybrid Woven Composite Laminates

Obinna Emmanuel Ebubechukwu iD, Guohui Chang, Qing Miao, Hiranya Uthpali Herath iD, Jiaxi Zhang, Deng'an Cai iD

Materials · 10.08.2026 · 19 (16) · 3399

DOI: 10.3390/ma19163399 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.08.2026. Verfasst von Obinna Emmanuel Ebubechukwu und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Mechanics and Control for Mechanical Structures, College of Aerospace Engineering, Nanjing University of Aeronautics and Astr…. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Funding of National Key Laboratory of Digital and Agile Aircraft Design, Priority Academic Program Development of Jiangsu Higher Education Institutions.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of oblique quasi-static indentation (QSI) angles on damage evolution and the residual compressive behavior of carbon–glass hybrid woven composite laminates is investigated. Hemispherical indentation tests were performed at 15° and 30° oblique angles, and three QSI specimens and two CAI (compression after Indentation) specimens were tested at each indentation angle, while CT analysis was performed on one representative specimen per angle. The results show that increasing the indentation angle had little effect on the peak indentation load but significantly increased the displacement at peak load and the total energy absorption. The CT analysis showed that the 30° indentation caused a wider and more distributed damage morphology compared to the localized damage pattern observed at 15°. Interestingly, the residual CAI strength of the 30° specimens was higher than that of the 15° specimens, which may be associated with the more distributed damage morphology and reduced severity of localized damage concentration. The progressive damage analysis using a homogenized ply-level Hashin progressive damage model implemented in Abaqus/Explicit is in good agreement with experimental results. These results provide insight into the mechanics of oblique contact damage in hybrid woven composites, which are important for damage-tolerant aerospace structural design.

Schlagwörter

Stichwörter der Autor:innen

compression after indentationfailure mechanismfinite elementhybrid woven compositesquasi-static indentationstacking sequences

Autor:innen und Institutionen

  • State Key Laboratory of Mechanics and Control for Mechanical Structures, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
  • AVIC Chengdu Aircraft Design & Research Institute, Chengdu 610091, China.
  • National Key Laboratory of Digital and Agile Aircraft Design, Chengdu 610091, China.

ORCID-Profile: Obinna Emmanuel Ebubechukwu, Hiranya Uthpali Herath, Deng'an Cai

Förderung

  • Open Funding of National Key Laboratory of Digital and Agile Aircraft Design
  • Priority Academic Program Development of Jiangsu Higher Education Institutions

Zitieren

APA

Ebubechukwu, O. E., Chang, G., Miao, Q., Herath, H. U., Zhang, J., & Cai, D. (2026). Oblique Quasi-Static Indentation and Residual Compressive Behavior of Hybrid Woven Composite Laminates. Materials, 19(16), 3399. https://doi.org/10.3390/ma19163399

Vancouver

Ebubechukwu OE, Chang G, Miao Q, Herath HU, Zhang J, Cai D. Oblique Quasi-Static Indentation and Residual Compressive Behavior of Hybrid Woven Composite Laminates. Materials. 2026;19(16):3399. doi:10.3390/ma19163399

BibTeX
@article{Ebubechukwu2026,
  author = {Ebubechukwu, Obinna Emmanuel and Chang, Guohui and Miao, Qing and Herath, Hiranya Uthpali and Zhang, Jiaxi and Cai, Deng'an},
  title = {Oblique Quasi-Static Indentation and Residual Compressive Behavior of Hybrid Woven Composite Laminates},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3399},
  doi = {10.3390/ma19163399}
}
Kostenlos starten →