EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Competitive Meso-Damage Model Dependent on Stress State for Advanced High-Strength Steels

Hongpai Zhu iD, Di Li, Junjie Liu, Jinbing Ding, Wancong Xu

Materials · 10.08.2026 · 19 (16) · 3390

DOI: 10.3390/ma19163390 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.08.2026. Verfasst von Hongpai Zhu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255000, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China National Heavy Duty Truck Group (China), China-Sino Truck Group industry, Rongcheng Compaks New Energy Automobile Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advanced High-Strength Steel (AHSS) exhibits stress-state-dependent competing shear–tensile fracture modes that limit the applicability of conventional ductile fracture criteria based solely on equivalent plastic strain accumulation, such as the Forming Limit Diagram (FLD) approach and the classical Gurson–Tvergaard–Needleman (GTN) model. This paper proposes an extended GTN damage model incorporating Hill’48 anisotropy and the Nahshon–Hutchinson shear mechanism, regulated by a stress-state-dependent weighting function. The experimental program comprised uniaxial tension tests for constitutive calibration, notched plate specimens with shear angles ranging from 0° to 90° (spanning pure shear to tensile–shear stress states), and tension-bending tests. The fracture initiation point was identified from the abrupt load drop on the experimental force–displacement curve and further located in the finite element simulation to extract the corresponding stress-state history. SEM fractography was employed to characterize the microscopic damage mechanisms, revealing a continuous transition from shear-dominated to void-dominated damage at a critical stress triaxiality of approximately 0.35. A weighting function dependent on both stress triaxiality and the normalized Lode angle was formulated to couple void evolution with shear band localization. Following calibration via finite element inverse fitting, the model, implemented as an ABAQUS VUMAT subroutine, successfully reproduced fracture strains and crack paths across stress states ranging from pure shear to high hydrostatic tension. Comparative simulations indicate that this approach yields improved prediction accuracy over the classical GTN model, particularly under mixed-mode conditions, thereby offering a practical numerical tool for analyzing AHSS formability.

Schlagwörter

Stichwörter der Autor:innen

GTNLode angleadvanced high-strength steelcompetitive fracturemicrodamage mechanicsstress triaxiality

Autor:innen und Institutionen

  • School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255000, China.

ORCID-Profile: Hongpai Zhu

Förderung

  • China National Heavy Duty Truck Group (China)
  • China-Sino Truck Group industry
  • Rongcheng Compaks New Energy Automobile Co., Ltd.

Zitieren

APA

Zhu, H., Li, D., Liu, J., Ding, J., & Xu, W. (2026). Competitive Meso-Damage Model Dependent on Stress State for Advanced High-Strength Steels. Materials, 19(16), 3390. https://doi.org/10.3390/ma19163390

Vancouver

Zhu H, Li D, Liu J, Ding J, Xu W. Competitive Meso-Damage Model Dependent on Stress State for Advanced High-Strength Steels. Materials. 2026;19(16):3390. doi:10.3390/ma19163390

BibTeX
@article{Zhu2026,
  author = {Zhu, Hongpai and Li, Di and Liu, Junjie and Ding, Jinbing and Xu, Wancong},
  title = {Competitive Meso-Damage Model Dependent on Stress State for Advanced High-Strength Steels},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3390},
  doi = {10.3390/ma19163390}
}
Kostenlos starten →