EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Evolution and Mechanical Properties of AA2017 Aluminum Alloy Joints Produced by Rotary Friction Welding and TIG Welding

Piotr Noga iD, Anna Kula iD, Marcel Wiewióra iD, Tomasz Skrzekut iD

Materials · 09.08.2026 · 19 (16) · 3385

DOI: 10.3390/ma19163385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.08.2026. Verfasst von Piotr Noga und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Non-Ferrous Metals, AGH University of Krakow, Mickiewicza 30 Av., 30-059 Krakow, Poland. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of joining technology on the microstructural evolution and mechanical properties of joints produced from extruded AA2017 aluminum alloy rods. Rotary Friction Welding (RFW) was compared with conventional TIG welding to evaluate the effects of solid-state and fusion-based joining mechanisms. The joints were characterized using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), electron backscatter diffraction (EBSD), hardness measurements, tensile testing, and fracture analysis. TIG welding produced a coarse-grained cast microstructure within the fusion zone, whereas RFW generated a fine-grained microstructure formed through intense thermomechanical deformation accompanied by crystallographic texture evolution. These distinct microstructural characteristics resulted in markedly different mechanical behavior. The RFW joints achieved an ultimate tensile strength of 247 MPa and an elongation to failure of 12.5%, compared with 160 MPa and 1.7%, respectively, for the TIG-welded joints. The results demonstrate that the joint formation mechanism is the primary factor governing the microstructural evolution and mechanical performance of AA2017 alloy joints.

Schlagwörter

Stichwörter der Autor:innen

AA2017 aluminum alloyTIG weldingmicrostructure evolutionrotational friction welding

Autor:innen und Institutionen

  • Faculty of Non-Ferrous Metals, AGH University of Krakow, Mickiewicza 30 Av., 30-059 Krakow, Poland.

ORCID-Profile: Piotr Noga, Anna Kula, Marcel Wiewióra, Tomasz Skrzekut

Förderung

  • AGH University of Krakow

Zitieren

APA

Noga, P., Kula, A., Wiewióra, M., & Skrzekut, T. (2026). Microstructural Evolution and Mechanical Properties of AA2017 Aluminum Alloy Joints Produced by Rotary Friction Welding and TIG Welding. Materials, 19(16), 3385. https://doi.org/10.3390/ma19163385

Vancouver

Noga P, Kula A, Wiewióra M, Skrzekut T. Microstructural Evolution and Mechanical Properties of AA2017 Aluminum Alloy Joints Produced by Rotary Friction Welding and TIG Welding. Materials. 2026;19(16):3385. doi:10.3390/ma19163385

BibTeX
@article{Noga2026,
  author = {Noga, Piotr and Kula, Anna and Wiewióra, Marcel and Skrzekut, Tomasz},
  title = {Microstructural Evolution and Mechanical Properties of AA2017 Aluminum Alloy Joints Produced by Rotary Friction Welding and TIG Welding},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3385},
  doi = {10.3390/ma19163385}
}
Kostenlos starten →