Functionally Graded Materials by Wire Arc Additive Manufacturing: Material-Pair Compatibility and Spatial Mechanical Characterisation—A Systematic Review
Materials · 08.08.2026 · 19 (16) · 3379
DOI: 10.3390/ma19163379 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 08.08.2026. Verfasst von Filipa G Cunha und 2 weiteren Autor:innen. Beteiligte Einrichtung: Research and Development Unit for Mechanical and Industrial Engineering (UNIDEMI), Department of Mechanical and Industrial Engineering (DEMI), NOVA S…. Die Arbeit nennt 256 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia.
Abstract (Originalsprache)
Functionally Graded Materials (FGMs) vary in composition and properties for tailored structural performance. Additive Manufacturing (AM), particularly Wire Arc Additive Manufacturing (WAAM), offers a scalable route to metallic FGMs, but manufacture and mechanical qualification remain disconnected. Scopus and Web of Science Core Collection were searched for eligible publications up to and including 31 July 2026. The review includes 176 studies, and every conclusion is graded by a review-specific certainty scheme and bounded to this corpus. The review connects FGM manufacture with full-field inverse identification of spatially varying properties. Evidence indicates interface-defect risk depends on metallurgical compatibility and the composition path. Intermetallic-forming or thermally mismatched pairs remain vulnerable despite process optimisation. Stainless-steel–Ni-superalloy combinations are more frequently reported as sound but only within the composition intervals validated in the cited builds: this apparent advantage reflects unequal study numbers and cracking in specific composition windows. A four-stage sequence—screening phase stability and thermal-expansion mismatch before optimising deposition parameters, then validating the complete composition path—is proposed as an evidence-informed framework rather than a validated decision map. Conventional tests generally provide averaged or location-specific properties rather than a continuous constitutive gradient. Digital image correlation coupled with inverse identification methods can enable the determination of spatially varying properties from a heterogeneous test. However, no experimental study identified a spatial constitutive law across a deliberate WAAM compositional gradient.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research and Development Unit for Mechanical and Industrial Engineering (UNIDEMI), Department of Mechanical and Industrial Engineering (DEMI), NOVA School of Science and Technology, NOVA University Lisbon, 2829-516 Capa…
- Intelligent Systems Associate Laboratory (LASI), Campus Azurém, 4800-058 Guimarães, Portugal.
ORCID-Profile: Filipa G Cunha, Telmo G Santos, José Xavier
Förderung
- Fundação para a Ciência e Tecnologia
Zitieren
APA
Cunha, F. G., Santos, T. G., & Xavier, J. (2026). Functionally Graded Materials by Wire Arc Additive Manufacturing: Material-Pair Compatibility and Spatial Mechanical Characterisation—A Systematic Review. Materials, 19(16), 3379. https://doi.org/10.3390/ma19163379
Vancouver
Cunha FG, Santos TG, Xavier J. Functionally Graded Materials by Wire Arc Additive Manufacturing: Material-Pair Compatibility and Spatial Mechanical Characterisation—A Systematic Review. Materials. 2026;19(16):3379. doi:10.3390/ma19163379
BibTeX
@article{Cunha2026,
author = {Cunha, Filipa G and Santos, Telmo G and Xavier, José},
title = {Functionally Graded Materials by Wire Arc Additive Manufacturing: Material-Pair Compatibility and Spatial Mechanical Characterisation—A Systematic Review},
journal = {Materials},
year = {2026},
volume = {19},
number = {16},
pages = {3379},
doi = {10.3390/ma19163379}
}
EUVIMED