EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Scale Characterization of Interfacial Adhesion and Material Selection for Crack Sealants in High-Altitude Airport Asphalt Pavements

Shuqi Li, Yukun Zhou, Xiaoyi Du, Bing Hui

Materials · 05.08.2026 · 19 (15) · 3329

DOI: 10.3390/ma19153329 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.08.2026. Verfasst von Shuqi Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Highway, Chang'an University, Xi'an 710064, China. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Safety Capability Development Program of CAAC, the Key Research and Transformation Project of the Department of Science and Technology of Tibet Au-tonomous Region, Key Research and Transformation Project of the Department of Science and Technology of Tibet Au-tonomous Region.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Asphalt pavements at high-altitude airports endure prolonged extreme low temperatures and large diurnal swings, imposing stringent demands on crack sealants, whose multi-scale adhesion failure mechanism remains unclear. Three SBS and crumb-rubber-composite-modified sealants, designated A, B and C, were characterized through surface free energy tests, pull-off and shear tests, fluorescence microscopy, FTIR and molecular dynamics simulations. Cross-scale correlation analysis and CRITIC-TOPSIS were applied to link and rank the sealants across scales. Work of cohesion, work of adhesion, pull-off strength and shear strength all rose monotonically with modifier content, and sealant C exhibited a 38.5% higher work of cohesion and a 52.4% lower CVφ than sealant A. Molecular dynamics simulations showed that electrostatic forces drove sealant–aggregate adhesion while van der Waals forces governed sealant–asphalt adhesion, with a simulation–experiment deviation of only 2.88–5.74%. A level-by-level transmission linked phase-morphology uniformity, intermolecular interaction, interfacial energy and macroscopic mechanical performance. Sealant C achieved a CRITIC-TOPSIS index of 1.000, far above 0.271 for B and 0.000 for A, and is recommended as the preferred material for crack sealing of high-altitude airport asphalt pavements.

Schlagwörter

Stichwörter der Autor:innen

asphalt pavementcrack sealantinterfacial adhesion failuremolecular dynamics simulationmulti-scale analysis

Autor:innen und Institutionen

  • School of Highway, Chang'an University, Xi'an 710064, China.
  • The Key Laboratory of Intelligent Construction and Maintenance of CAAC, Chang'an University, Xi'an 710064, China.

Förderung

  • Safety Capability Development Program of CAAC
  • the Key Research and Transformation Project of the Department of Science and Technology of Tibet Au-tonomous Region
  • Key Research and Transformation Project of the Department of Science and Technology of Tibet Au-tonomous Region

Zitieren

APA

Li, S., Zhou, Y., Du, X., & Hui, B. (2026). Multi-Scale Characterization of Interfacial Adhesion and Material Selection for Crack Sealants in High-Altitude Airport Asphalt Pavements. Materials, 19(15), 3329. https://doi.org/10.3390/ma19153329

Vancouver

Li S, Zhou Y, Du X, Hui B. Multi-Scale Characterization of Interfacial Adhesion and Material Selection for Crack Sealants in High-Altitude Airport Asphalt Pavements. Materials. 2026;19(15):3329. doi:10.3390/ma19153329

BibTeX
@article{Li2026,
  author = {Li, Shuqi and Zhou, Yukun and Du, Xiaoyi and Hui, Bing},
  title = {Multi-Scale Characterization of Interfacial Adhesion and Material Selection for Crack Sealants in High-Altitude Airport Asphalt Pavements},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3329},
  doi = {10.3390/ma19153329}
}
Kostenlos starten →