Revealing the Nanoindentation-Induced Plastic Deformation Mechanisms of 4H-SiC: Combined Insights from Molecular Dynamics Simulations and Experiments
Materials · 04.08.2026 · 19 (15) · 3306
DOI: 10.3390/ma19153306 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.08.2026. Verfasst von Wuqing Lin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, The High-level Talent Innovation Project of Quanzhou Science and Technology Bureau, High-level Talent Innovation Project of Quanzhou Science and Technology Bureau.
Abstract (Originalsprache)
4H-SiC substrate is widely employed in semiconductor device fabrication owing to its unique crystal structure and excellent physicochemical properties. However, its deformation behavior during substrate processing remains complex and not fully understood. In this study, molecular dynamics (MD) simulations were performed to systematically investigate the deformation mechanism of single-crystal 4H-SiC during nanoindentation, serving as an atomic-scale analogue of the workpiece–abrasive interaction during substrate processing. Specifically, the relationship between the fluctuations of the load–depth curve and slip were revealed, with particular emphasis on the basal slip (BS) and prismatic slip (PS) behaviors. The results indicate that the fluctuations in the load–depth curve are primarily associated with the nucleation and propagation of dislocations. The initiation of BS is predominantly influenced by the atomic arrangement and stress distribution, while PS initiates at the terminus of BS as the indentation depth increases. Finally, nanoindentation experiments were conducted to validate the reliability of the MD simulations. These findings provide valuable insights into the deformation mechanism and mechanical behavior of 4H-SiC during practical substrate processing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China.
- State Key Laboratory for High Performance Tools, Huaqiao University, Xiamen 361021, China.
- Hunan Sanan Semiconductor Co., Ltd., Changsha 410100, China.
- Fujian Jing'an Optoelectronics Co., Ltd., Quanzhou 362411, China.
Förderung
- National Natural Science Foundation of China
- The High-level Talent Innovation Project of Quanzhou Science and Technology Bureau
- High-level Talent Innovation Project of Quanzhou Science and Technology Bureau
Zitieren
APA
Lin, W., Li, H., Hu, Z., Peng, F., Zhou, Z., Yu, Y., Wu, Y., & Xu, X. (2026). Revealing the Nanoindentation-Induced Plastic Deformation Mechanisms of 4H-SiC: Combined Insights from Molecular Dynamics Simulations and Experiments. Materials, 19(15), 3306. https://doi.org/10.3390/ma19153306
Vancouver
Lin W, Li H, Hu Z, Peng F, Zhou Z, Yu Y, et al. Revealing the Nanoindentation-Induced Plastic Deformation Mechanisms of 4H-SiC: Combined Insights from Molecular Dynamics Simulations and Experiments. Materials. 2026;19(15):3306. doi:10.3390/ma19153306
BibTeX
@article{Lin2026,
author = {Lin, Wuqing and Li, Hongyang and Hu, Zhongwei and Peng, Fuxin and Zhou, Zhihao and Yu, Yiqing and Wu, Yueqin and Xu, Xipeng},
title = {Revealing the Nanoindentation-Induced Plastic Deformation Mechanisms of 4H-SiC: Combined Insights from Molecular Dynamics Simulations and Experiments},
journal = {Materials},
year = {2026},
volume = {19},
number = {15},
pages = {3306},
doi = {10.3390/ma19153306}
}
EUVIMED