EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Ni Contents and Local Hydrogen Concentration on Crack Propagation in FCC Fe-Ni Alloy Models: A Molecular Dynamics Study

Kaimeng Wang, Yingli Li, Molin Su iD, Hongqiao Yan, Yue Zhao, Lei Zhao

Materials · 04.08.2026 · 19 (15) · 3304

DOI: 10.3390/ma19153304 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.08.2026. Verfasst von Kaimeng Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: CNPC Research Institute of Safety & Environment Technology, Beijing 102206, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPC Youth Science and Technology Special Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the atomic-scale effects of hydrogen concentration and Ni content on crack propagation in Fe-Ni alloy models using molecular dynamics methods. A Mode I crack model with a (001)[100] orientation was constructed, and hydrogen atoms were locally introduced at the crack tip with concentrations of 5.3 at.% and 14.3 at.%. Fe-Ni alloy models with 5%, 10%, 15%, and 20% Ni were compared in terms of crack growth, dislocation evolution, stacking fault energy, and hydrogen diffusion. The results show that local hydrogen introduction has a limited effect on the peak stress–strain response, while hydrogen clearly accelerates crack propagation in the middle stage, especially at high concentrations. For the 10% Ni model, the middle-stage crack growth rate increases to 0.36 Å/ps under 14.3 at.% crack-tip hydrogen. Crack growth in all models shows three stages. The 15% Ni model exhibits a clear plateau in the second stage and the shortest final crack length. Further analysis shows that Ni content regulates dislocation behavior through stacking fault energy. At 15% Ni, sustained dislocation entanglement and high-density dislocation multiplication occur near the crack tip, which helps dissipate local stress. Hydrogen diffusion analysis indicates that hydrogen mobility is lower in the 15% Ni model, which may be related to hydrogen retention near dislocation-rich regions. A normalized comparison based on hydrogen diffusion and middle-stage crack growth rate further identifies 15% Ni as the lowest crack propagation tendency composition among the studied models. These results provide atomic-scale data for Ni-content optimization in hydrogen-resistant alloys, although the direct engineering transfer of the findings is limited by the length and time scales of molecular dynamics simulations.

Schlagwörter

Stichwörter der Autor:innen

Fe-Ni Alloy Modelscrack propagationhydrogen diffusionmolecular dynamics

Autor:innen und Institutionen

  • CNPC Research Institute of Safety & Environment Technology, Beijing 102206, China.
  • School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China.

ORCID-Profile: Molin Su

Förderung

  • CNPC Youth Science and Technology Special Project

Zitieren

APA

Wang, K., Li, Y., Su, M., Yan, H., Zhao, Y., & Zhao, L. (2026). Influence of Ni Contents and Local Hydrogen Concentration on Crack Propagation in FCC Fe-Ni Alloy Models: A Molecular Dynamics Study. Materials, 19(15), 3304. https://doi.org/10.3390/ma19153304

Vancouver

Wang K, Li Y, Su M, Yan H, Zhao Y, Zhao L. Influence of Ni Contents and Local Hydrogen Concentration on Crack Propagation in FCC Fe-Ni Alloy Models: A Molecular Dynamics Study. Materials. 2026;19(15):3304. doi:10.3390/ma19153304

BibTeX
@article{Wang2026,
  author = {Wang, Kaimeng and Li, Yingli and Su, Molin and Yan, Hongqiao and Zhao, Yue and Zhao, Lei},
  title = {Influence of Ni Contents and Local Hydrogen Concentration on Crack Propagation in FCC Fe-Ni Alloy Models: A Molecular Dynamics Study},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3304},
  doi = {10.3390/ma19153304}
}
Kostenlos starten →