Microstructural and Mechanical Property Analysis of Oil Shale Semi-Coke Slag Composite Cementitious Materials
Materials · 04.08.2026 · 19 (15) · 3303
DOI: 10.3390/ma19153303 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.08.2026. Verfasst von Bo Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Gansu Industry Technology Center of Transportation Construction Materials Research and Application, Lanzhou Jiaotong University, Lanzhou 730070, Chin…. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Gansu Provincial Innovation Group in Fundamental Research, Gansu Science and Technology Major Project.
Abstract (Originalsprache)
The utilization of industrial solid waste is crucial for sustainable development. This study developed a novel composite cementitious material (OSSC-GGBS) using oil shale semi-coke and slag as cement substitutes. A multi-objective optimization method was employed to determine the optimal formulation of OSSC-GGBS. Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM-EDS), Thermogravimetric Analysis (TG-DTG-DSC), and pH testing. Finally, the synergistic effects of oil shale semi-coke and slag on the mechanical properties of this composite material were thoroughly investigated. Results indicate that the composite cementitious material exhibits optimal performance when the mass ratio of oil shale semi-coke to slag is 3:7, cement content is 15%, water glass modulus is 1.4, and water glass content is 10%. Microscopic analysis revealed that the synergistic interaction between oil shale semi-coke and slag optimized the microstructure of OSSC-GGBS. Its hydration products primarily consisted of C-S-H gel, Ca(OH)2, and AFt, forming a dense and stable microstructure. Simultaneously, under alkali-activated conditions, oil shale semi-coke and slag synergistically participated in hydration reactions and secondary pozzolanic reactions. This significantly promoted the formation of cementitious products such as calcium silicate hydrate (C-S-H) and calcium aluminate hydrate (C-A-H). These products filled internal pores to form a network skeleton, thereby optimizing the microstructure.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Gansu Industry Technology Center of Transportation Construction Materials Research and Application, Lanzhou Jiaotong University, Lanzhou 730070, China.
- The Highway Development Center of Gansu Province, Lanzhou 730000, China.
- Gansu Geri Engineering Testing Co., Ltd., Lanzhou 730030, China.
ORCID-Profile: Liangying Li
Förderung
- National Natural Science Foundation of China
- Gansu Provincial Innovation Group in Fundamental Research
- Gansu Science and Technology Major Project
- Gansu Provincial Key R&D Program
Zitieren
APA
Li, B., Zhou, X., Chen, T., Yang, Z., Sha, M., Li, L., & Li, L. (2026). Microstructural and Mechanical Property Analysis of Oil Shale Semi-Coke Slag Composite Cementitious Materials. Materials, 19(15), 3303. https://doi.org/10.3390/ma19153303
Vancouver
Li B, Zhou X, Chen T, Yang Z, Sha M, Li L, et al. Microstructural and Mechanical Property Analysis of Oil Shale Semi-Coke Slag Composite Cementitious Materials. Materials. 2026;19(15):3303. doi:10.3390/ma19153303
BibTeX
@article{Li2026,
author = {Li, Bo and Zhou, Xiang and Chen, Tao and Yang, Zhenhua and Sha, Mingyu and Li, Lianwei and Li, Liangying},
title = {Microstructural and Mechanical Property Analysis of Oil Shale Semi-Coke Slag Composite Cementitious Materials},
journal = {Materials},
year = {2026},
volume = {19},
number = {15},
pages = {3303},
doi = {10.3390/ma19153303}
}
EUVIMED