EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Measurement of the Pitch Diameter of Buttress Threads Using a Touch-Trigger Probe on a CNC Machine Tool

Bartłomiej Krawczyk iD, Piotr Szablewski iD, Sylwia Wencel iD

Materials · 03.08.2026 · 19 (15) · 3293

DOI: 10.3390/ma19153293 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.08.2026. Verfasst von Bartłomiej Krawczyk und 2 weiteren Autor:innen. Beteiligte Einrichtung: Pratt & Whitney Kalisz, Elektryczna 4a, 62-800 Kalisz, Poland. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research evaluates the accuracy and repeatability of a novel procedure for measuring pitch diameter using a touch-trigger probe in a production environment. Experiments were performed on a WFL M40 machine equipped with a Renishaw RMP600 strain gauge probe, using different thread types and machine tools. The results were validated by comparison with the traditional three-wire method, which is regarded as a high-precision reference for pitch diameter measurement. Statistical analyses, including the Shapiro–Wilk test, ANOVA, and Tukey HSD post hoc tests, were applied to assess error distribution and differences between thread types and machines. The proposed method demonstrated satisfactory accuracy and repeatability, with an error spread of approximately ±0.015 mm, achieving measurement results within the manufacturing tolerance range (±0.07 mm). The study also showed that measurement accuracy is influenced by factors such as thread angle and Z-axis positioning. Overall, the method proved to be reliable for production use, offering a good balance between measurement accuracy and operational efficiency, although minor adjustments may be needed for automatic correction routines.

Schlagwörter

Stichwörter der Autor:innen

CNCmeasurementpitch diameterthreadtouch-trigger probe

Autor:innen und Institutionen

  • Pratt & Whitney Kalisz, Elektryczna 4a, 62-800 Kalisz, Poland.
  • Institute of Mechanical Engineering, University of Kalisz, Wojciecha Bogusławskiego 2, 62-800 Kalisz, Poland.
  • Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Av. Armii Krajowej 19, 42-201 Czestochowa, Poland.

ORCID-Profile: Bartłomiej Krawczyk, Piotr Szablewski, Sylwia Wencel

Zitieren

APA

Krawczyk, B., Szablewski, P., & Wencel, S. (2026). Measurement of the Pitch Diameter of Buttress Threads Using a Touch-Trigger Probe on a CNC Machine Tool. Materials, 19(15), 3293. https://doi.org/10.3390/ma19153293

Vancouver

Krawczyk B, Szablewski P, Wencel S. Measurement of the Pitch Diameter of Buttress Threads Using a Touch-Trigger Probe on a CNC Machine Tool. Materials. 2026;19(15):3293. doi:10.3390/ma19153293

BibTeX
@article{Krawczyk2026,
  author = {Krawczyk, Bartłomiej and Szablewski, Piotr and Wencel, Sylwia},
  title = {Measurement of the Pitch Diameter of Buttress Threads Using a Touch-Trigger Probe on a CNC Machine Tool},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3293},
  doi = {10.3390/ma19153293}
}
Kostenlos starten →