EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Role of CaCO3 in Retarding UV- and Thermally Induced Degradation of PVC Compounds

Soraya Nait Larbi iD, Abdallah Hedir iD, Mustapha Moudoud, David Clark iD, Ali Durmus iD, Omar Lamrous, Abderrahmane Haddad iD

Materials · 02.08.2026 · 19 (15) · 3270

DOI: 10.3390/ma19153270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2026. Verfasst von Soraya Nait Larbi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire de Technologies Avancées en Génie Electrique, (LATAGE), Université Mouloud Mammeri de Tizi-Ouzou, BP 17 RP, Tizi-Ouzou 15000, Algeria. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study provides an in-depth investigation of the influence of calcium carbonate (CaCO3) filler on the mechanical performance and aging resistance of polyvinyl chloride (PVC)-based composites. PVC/CaCO3 composites containing 2.5, 5, and 7.5 wt% of CaCO3 were subjected to accelerated aging under combined ultraviolet (UV) irradiation and thermal stress for up to 1248 h. The key mechanical properties of specimens —tensile strength and elongation at break—were measured before and after aging. Changes in surface morphology, coloration, hydrophobicity, and chemical composition were characterized using scanning electron microscopy (SEM-EDS), X-ray spectroscopy, atomic force microscopy (AFM), contact angle measurements, and carbonyl index calculation to quantify relationships between the structural and physical properties of the specimens and aging conditions. The results reveal a significant correlation between filler content and the mechanical behavior of aged specimens, highlighting the potential of CaCO3 reinforcement not only to improve the retention of mechanical properties but also to increase the service life of PVC-based insulation compounds.

Schlagwörter

Stichwörter der Autor:innen

PVC/CaCO3 compositesaccelerated agingmechanical propertiesservice lifesurface morphology

Autor:innen und Institutionen

  • Laboratoire de Technologies Avancées en Génie Electrique, (LATAGE), Université Mouloud Mammeri de Tizi-Ouzou, BP 17 RP, Tizi-Ouzou 15000, Algeria.
  • Advanced High Voltage Engineering Center, School of Engineering, Cardiff University, Queen's Buildings, The Parade, Cardiff CF24 3AA, UK.
  • Department of Chemical Engineering, Engineering Faculty, Istanbul University-Cerrahpasa, Istanbul 34320, Turkey.
  • Laboratoire de Physique et Chimie Quantique (LPCQ), Université Mouloud Mammeri de Tizi-Ouzou, BP 17 RP, Tizi-Ouzou 15000, Algeria.

ORCID-Profile: Soraya Nait Larbi, Abdallah Hedir, David Clark, Ali Durmus, Abderrahmane Haddad

Zitieren

APA

Nait Larbi, S., Hedir, A., Moudoud, M., Clark, D., Durmus, A., Lamrous, O., & Haddad, A. (2026). Role of CaCO3 in Retarding UV- and Thermally Induced Degradation of PVC Compounds. Materials, 19(15), 3270. https://doi.org/10.3390/ma19153270

Vancouver

Nait Larbi S, Hedir A, Moudoud M, Clark D, Durmus A, Lamrous O, et al. Role of CaCO3 in Retarding UV- and Thermally Induced Degradation of PVC Compounds. Materials. 2026;19(15):3270. doi:10.3390/ma19153270

BibTeX
@article{NaitLarbi2026,
  author = {Nait Larbi, Soraya and Hedir, Abdallah and Moudoud, Mustapha and Clark, David and Durmus, Ali and Lamrous, Omar and Haddad, Abderrahmane},
  title = {Role of CaCO3 in Retarding UV- and Thermally Induced Degradation of PVC Compounds},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3270},
  doi = {10.3390/ma19153270}
}
Kostenlos starten →