EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Second-Phase Grain Boundary Engineering in Al2O3-MgAl2O4 Composites: Microstructure and Dielectric Breakdown Reliability

Yaling Yu, Wei Xu, Chenyang Zhang, Huan Yang iD, Shaomin Lin iD

Materials · 02.08.2026 · 19 (15) · 3263

DOI: 10.3390/ma19153263 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2026. Verfasst von Yaling Yu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Ceramic Materials Innovation Research Center, Hanshan Normal University, Chaozhou 521041, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Special Project in Key Fields of General Universities in Guangdong Province, Key Fields of General Universities in Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The escalating demands of pulsed power technology and high-energy-density capacitors necessitate dielectric ceramics with simultaneously enhanced breakdown reliability and microstructural homogeneity. Herein, Al2O3-MgAl2O4 composites were fabricated via a solid-state reaction using 80 wt% α-Al2O3 with kaolin/MgO mass ratios of 7:1, 4:1, and 1:1. XRD presents a dual-pathway spinel formation mechanism. SEM reveals 2–5 μm columnar spinel grains uniformly dispersed at grain boundaries. Porosity decreased from 4.29% to 2.69% while grain size increased from 3.35 to 5.64 μm as MgO content rose. Weibull analysis (n ≥ 10) showed that the 4:1 group achieved optimal dielectric reliability with a characteristic breakdown strength of 17.74 kV/mm and a Weibull modulus of 16.07, representing 8.76% and 20.93% improvements over the 7:1 (16.31 kV/mm, m = 24.58) and 1:1 (14.67 kV/mm, m = 15.37) groups, respectively. The 4:1 composition balanced grain boundary pinning (4.61 μm) and residual porosity (3.59%), maximizing interfacial charge scattering. Excess MgO (1:1) introduced residual Mg2+ into the glassy phase, inducing ionic conduction and premature breakdown. This study establishes a quantitative “microstructural composition–defect size distribution–dielectric breakdown” correlation, providing a theoretical foundation for microstructural optimization of low-cost alumina-based energy storage ceramics.

Schlagwörter

Stichwörter der Autor:innen

Weibull statisticsaluminadielectric breakdowngrain boundary engineeringmagnesium aluminate spinel

Autor:innen und Institutionen

  • Advanced Ceramic Materials Innovation Research Center, Hanshan Normal University, Chaozhou 521041, China.
  • School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.

ORCID-Profile: Huan Yang, Shaomin Lin

Förderung

  • The Special Project in Key Fields of General Universities in Guangdong Province
  • Key Fields of General Universities in Guangdong Province

Zitieren

APA

Yu, Y., Xu, W., Zhang, C., Yang, H., & Lin, S. (2026). Second-Phase Grain Boundary Engineering in Al2O3-MgAl2O4 Composites: Microstructure and Dielectric Breakdown Reliability. Materials, 19(15), 3263. https://doi.org/10.3390/ma19153263

Vancouver

Yu Y, Xu W, Zhang C, Yang H, Lin S. Second-Phase Grain Boundary Engineering in Al2O3-MgAl2O4 Composites: Microstructure and Dielectric Breakdown Reliability. Materials. 2026;19(15):3263. doi:10.3390/ma19153263

BibTeX
@article{Yu2026,
  author = {Yu, Yaling and Xu, Wei and Zhang, Chenyang and Yang, Huan and Lin, Shaomin},
  title = {Second-Phase Grain Boundary Engineering in Al2O3-MgAl2O4 Composites: Microstructure and Dielectric Breakdown Reliability},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3263},
  doi = {10.3390/ma19153263}
}
Kostenlos starten →