EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Modeling Strategies in Flax Fiber-Reinforced Polypropylene Forming Processes

Antonio Formisano iD, Ilaria Improta iD, Giuseppe Irace

Materials · 01.08.2026 · 19 (15) · 3254

DOI: 10.3390/ma19153254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.08.2026. Verfasst von Antonio Formisano und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical, Materials and Production Engineering, University of Naples Federico II, P.le V. Tecchio 80, 80125 Napoli, Italy. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Programma per il Finanziamento della Ricerca di Ateneo (FRA) 2022" of the University of Naples Federico II, “Programma per il Finanziamento della Ricerca di Ateneo (FRA) 2022” of the University of Naples Federico II.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural fiber-reinforced thermoplastic composites have gained increasing attention due to the abundant availability of natural fibers, their ability to effectively reinforce polymer matrices, and the resulting partial biodegradability of the final material. This study presents numerical modeling strategies for investigating the manufacture of spherical caps made from polypropylene composites reinforced with woven flax fabrics. The investigation considers both cold incremental forming and stretch-forming processes, performed either with or without the support of a partial counter die. Building on the findings of a previous experimental study conducted by the authors on compression-molded laminates manufactured using untreated woven flax fabrics and without coupling agents and formed without localized heating, numerical predictions are compared with experimental results in terms of final geometry, forming forces, and failure mechanisms. The findings highlight the need for a thorough understanding of material behavior to fully exploit finite element analysis as a reliable predictive tool in the forming of these innovative lightweight composite structures.

Schlagwörter

Stichwörter der Autor:innen

elastic springbackfailuresfinite element simulationsflax fibersforming forcesincremental formingpolypropylenestretch forming

Autor:innen und Institutionen

  • Department of Chemical, Materials and Production Engineering, University of Naples Federico II, P.le V. Tecchio 80, 80125 Napoli, Italy.
  • Institute of Polymers, Composites and Biomaterials, National Research Council, P.le E. Fermi 1, 80055 Portici, Italy.

ORCID-Profile: Antonio Formisano, Ilaria Improta

Förderung

  • Programma per il Finanziamento della Ricerca di Ateneo (FRA) 2022" of the University of Naples Federico II
  • “Programma per il Finanziamento della Ricerca di Ateneo (FRA) 2022” of the University of Naples Federico II

Zitieren

APA

Formisano, A., Improta, I., & Irace, G. (2026). Numerical Modeling Strategies in Flax Fiber-Reinforced Polypropylene Forming Processes. Materials, 19(15), 3254. https://doi.org/10.3390/ma19153254

Vancouver

Formisano A, Improta I, Irace G. Numerical Modeling Strategies in Flax Fiber-Reinforced Polypropylene Forming Processes. Materials. 2026;19(15):3254. doi:10.3390/ma19153254

BibTeX
@article{Formisano2026,
  author = {Formisano, Antonio and Improta, Ilaria and Irace, Giuseppe},
  title = {Numerical Modeling Strategies in Flax Fiber-Reinforced Polypropylene Forming Processes},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3254},
  doi = {10.3390/ma19153254}
}
Kostenlos starten →