Hot Deformation Behavior, Dynamic Recrystallization and Phase Transformation Mechanism of Zr-Nb Alloy During Compression Processing
Materials · 30.07.2026 · 19 (15) · 3237
DOI: 10.3390/ma19153237 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.07.2026. Verfasst von Yuanbo Bi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project for Advanced Materials.
Abstract (Originalsprache)
To reveal the high-temperature hot deformation mechanism and optimize the thermal processing window of Zr-Nb alloy, hot compression tests were implemented via a thermal simulation apparatus over temperatures ranging from 500 to 900 °C and strain rates of 0.01~10 s−1. The material’s flow performance, dynamic recrystallization (DRX) and phase transformation were systematically explored in this work. The results indicate that flow stress presents a negative correlation with deformation temperature and a positive correlation with strain rate. On the basis of measured stress–strain curves, the Arrhenius constitutive equation and processing map were established to quantitatively describe the alloy’s hot deformation behavior. Flow instability areas are mainly distributed in the low-temperature domain and the high strain rate region of medium-high temperature zones. The evolution of DRX under different strain rates and microstructural variations during phase transformation was analyzed in detail. Elevated strain rate leads to gradual grain refinement. Continuous dynamic recrystallization (CDRX) acts as the predominant DRX mode for Zr-Nb alloy, with merely minor discontinuous dynamic recrystallization (DDRX) features observed in the microstructure.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China.
- School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China.
- School of Nuclear Science and Technology, University of South China, Hengyang City 421009, China.
Förderung
- National Science and Technology Major Project for Advanced Materials
Zitieren
APA
Bi, Y., & Li, Y. (2026). Hot Deformation Behavior, Dynamic Recrystallization and Phase Transformation Mechanism of Zr-Nb Alloy During Compression Processing. Materials, 19(15), 3237. https://doi.org/10.3390/ma19153237
Vancouver
Bi Y, Li Y. Hot Deformation Behavior, Dynamic Recrystallization and Phase Transformation Mechanism of Zr-Nb Alloy During Compression Processing. Materials. 2026;19(15):3237. doi:10.3390/ma19153237
BibTeX
@article{Bi2026,
author = {Bi, Yuanbo and Li, Yuying},
title = {Hot Deformation Behavior, Dynamic Recrystallization and Phase Transformation Mechanism of Zr-Nb Alloy During Compression Processing},
journal = {Materials},
year = {2026},
volume = {19},
number = {15},
pages = {3237},
doi = {10.3390/ma19153237}
}
EUVIMED