EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Photocatalytic Degradation of NO Gas by Cement Paste Incorporated with Nano-TiO2

Zigeng Wang iD, Tong Liu, Yue Li iD, Chenwei Gu

Materials · 28.07.2026 · 19 (15) · 3214

DOI: 10.3390/ma19153214 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.07.2026. Verfasst von Zigeng Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing Key Laboratory of Earthquake Engineering and Structural R…. Die Arbeit nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Beijing Municipal Science and Technology Planning "Open competition" Project, National Natural Science Foundation of China, State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nitrogen oxides (NOx) emitted from anthropogenic sources pose severe threats to urban environments. While incorporating nano-TiO2 into cementitious materials offers a promising photocatalytic remediation strategy, the coupled effects of pore-structure modification and curing age on the degradation efficiency remain underexplored. This study systematically investigated the NO gas degradation performance of nano-TiO2-modified cement paste by controlling the TiO2 content (3–12%), air-entraining agent content, water-cement ratio, and curing age. The results indicate that an optimal nano-TiO2 content of 6% yields the highest compressive strength. Meanwhile, higher nano-TiO2 content (up to 12%) significantly enhances NO removal (reaching 9.73%), but excessive air-entraining agents trap the photocatalyst, thereby reducing efficiency. Furthermore, increasing the water-cement ratio promotes gas diffusion, whereas prolonged curing densifies the matrix and obstructs UV-catalyst contact, decreasing the removal ratio by 20.3% at 28 days. Microstructural analyses elucidate that NO is photocatalytically oxidized into nitrate ions (NO3−) without degrading the essential C–S–H gel. This study provides critical insights into the microstructural optimization of photocatalytic cements, offering a practical design framework for photocatalytic cements with potential for long-term environmental application, pending durability validation.

Schlagwörter

Stichwörter der Autor:innen

NO gasNano-TiO2cementmicrostructural analysisphotocatalytic degradation

Autor:innen und Institutionen

  • Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing Key Laboratory of Earthquake Engineering and Structural Retrofit, College of Architecture and Civil Engineering, Beijing Univer…
  • State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University, Chongqing 400074, China.
  • China Road & Bridge Corporation, Beijing 100011, China.

ORCID-Profile: Zigeng Wang, Yue Li

Förderung

  • Beijing Municipal Science and Technology Planning "Open competition" Project
  • National Natural Science Foundation of China
  • State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University
  • National Key Research and Development Program of China
  • State Key Laboratory of Silicate Materials for Architectures (Wuhan University of Technology)
  • Beijing Municipal Science and Technology Planning “Open competition” Project

Zitieren

APA

Wang, Z., Liu, T., Li, Y., & Gu, C. (2026). Study on Photocatalytic Degradation of NO Gas by Cement Paste Incorporated with Nano-TiO2. Materials, 19(15), 3214. https://doi.org/10.3390/ma19153214

Vancouver

Wang Z, Liu T, Li Y, Gu C. Study on Photocatalytic Degradation of NO Gas by Cement Paste Incorporated with Nano-TiO2. Materials. 2026;19(15):3214. doi:10.3390/ma19153214

BibTeX
@article{Wang2026,
  author = {Wang, Zigeng and Liu, Tong and Li, Yue and Gu, Chenwei},
  title = {Study on Photocatalytic Degradation of NO Gas by Cement Paste Incorporated with Nano-TiO2},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3214},
  doi = {10.3390/ma19153214}
}
Kostenlos starten →