EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermochemical Activation of Carbon Steel EAF and FeCr Slags for Chromium and Vanadium Leaching

Andrea Miškufová, Zita Takáčová iD, Jana Pirošková iD, Olívia Melegová, Dagmar Remeteiová, Jaroslav Briančin

Materials · 28.07.2026 · 19 (15) · 3213

DOI: 10.3390/ma19153213 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.07.2026. Verfasst von Andrea Miškufová und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials, Metallurgy and Recycling, Institute of Recycling and Environmental Technologies, Technical University of Kosice, Letna 1/9, 042…. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union`s Horizon 2020 Research and Innovation program, Slovak Research and Development Agency, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a novel, low-temperature thermochemical activation process for the selective extraction of Cr and V from carbon steel EAF (CH1) and FeCr (CH2) slags at temperatures of up to 600 °C. Of the twelve reagents tested, NaOH was identified as the optimal alkaline agent for Cr activation at 500 °C, achieving extraction yields of 61.6% for CH1 (slag-to-reagent ratio of 12:8 g) and 80.6% for CH2 (ratio of 12:16 g). KOH at 400 °C was the most effective reagent for V extraction, yielding 89.4% for CH1 and 54.5% for CH2. Maximum metal concentrations were achieved after only five minutes of leaching at 60 °C. The process exhibits high selectivity; primary matrix components (Fe, Si, Al, Ca, Mg) either do not leach or only leach in negligible amounts. Iron forms insoluble oxides, and calcium converts into stable calcite, while magnesium is bound in the form of hydrotalcite specifically in the CH2 slag leaching residue. The CaCO3 content was proven to be a crucial parameter determining the activation efficiency and effective transformation of Fe-Cr-V phases. This procedure enables the recovery of clean Cr and V leachates, while the residual mineral-rich fraction offers potential for various industrial applications in a closed-loop slag recycling process.

Schlagwörter

Stichwörter der Autor:innen

EAF slagFeCr SlagNaOHchromiumleachingthermochemical activationvanadium

Autor:innen und Institutionen

  • Faculty of Materials, Metallurgy and Recycling, Institute of Recycling and Environmental Technologies, Technical University of Kosice, Letna 1/9, 042 00 Kosice-Sever, Slovakia.
  • U. S. Steel, s.r.o. Kosice, Vstupny areal U. S. Steel, 044 54 Kosice, Slovakia.
  • Institute of Geotechnics, Slovak Academy of Sciences, Watsonova 45, 040 01 Kosice, Slovakia.

ORCID-Profile: Zita Takáčová, Jana Pirošková

Förderung

  • European Union`s Horizon 2020 Research and Innovation program
  • Slovak Research and Development Agency
  • European Union

Zitieren

APA

Miškufová, A., Takáčová, Z., Pirošková, J., Melegová, O., Remeteiová, D., & Briančin, J. (2026). Thermochemical Activation of Carbon Steel EAF and FeCr Slags for Chromium and Vanadium Leaching. Materials, 19(15), 3213. https://doi.org/10.3390/ma19153213

Vancouver

Miškufová A, Takáčová Z, Pirošková J, Melegová O, Remeteiová D, Briančin J. Thermochemical Activation of Carbon Steel EAF and FeCr Slags for Chromium and Vanadium Leaching. Materials. 2026;19(15):3213. doi:10.3390/ma19153213

BibTeX
@article{Mikufov2026,
  author = {Miškufová, Andrea and Takáčová, Zita and Pirošková, Jana and Melegová, Olívia and Remeteiová, Dagmar and Briančin, Jaroslav},
  title = {Thermochemical Activation of Carbon Steel EAF and FeCr Slags for Chromium and Vanadium Leaching},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3213},
  doi = {10.3390/ma19153213}
}
Kostenlos starten →