EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Particle Size Distribution of Coal Gangue on Performance of Prepared Ceramsite

Hao Guan, Baoqiang Zhao, Ruidong Guo, Yu Li, Lifeng Sun, Lingdong Zeng, Chaohui Wei

Materials · 28.07.2026 · 19 (15) · 3212

DOI: 10.3390/ma19153212 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.07.2026. Verfasst von Hao Guan und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The large-scale accumulation of coal gangue has caused serious environmental problems, and converting it into ceramsite is an important pathway for resource utilization. Grinding is a key step in the preparation of coal gangue ceramsite, but the effect of particle size distribution on heat release and ceramsite performance remains unclear. In this study, coal gangue with a calorific value of 699.77 kcal/kg was ground for 1, 2, 3, and 4 h, respectively, followed by pelletizing and sintering. The different ground powders and sintering ceramsites were investigated using particle size analysis, TG-DSC, and XRD, as well as pore structure and strength tests. The results show that for the Datong coal gangue raw material, grinding parameters and sintering regime adopted in this work, the powder milled for 2 h presents a left-shifted particle size distribution curve with a narrow main peak, particle refinement and a concentrated particle size profile (D50 = 8.498 μm, D90 = 23.941 μm). Combined with TG-DSC, XRD, and pore property test results, the 2 h ground powder delivers the most concentrated heat release during low-temperature combustion. This concentrated heat release is inferred to promote high-temperature mineral phase reconstruction and liquid phase formation, thereby generating a dense ceramsite structure featuring low apparent porosity, high closed porosity and excellent mechanical performance (water absorption: 2.99 ± 0.44%; compressive strength: 15.12 ± 0.43 MPa). When the grinding time is extended to 3 h, the particle size distribution broadens, and both the particle size distribution curve and the DSC curve show shoulder peaks, indicating dispersed heat release. Extending grinding time from 3 h to 4 h appears to induce fine-particle agglomeration with heat release becoming more dispersed and decreasing reaction degree, leading to an uneven temperature distribution and deteriorated ceramsite performance.

Schlagwörter

Stichwörter der Autor:innen

coal gangue ceramsitegrinding processmechanical propertiessintering behavior

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China.
  • China Energy Construction Coal Refuse Technology (Datong) Co., Ltd., Datong 037008, China.

Zitieren

APA

Guan, H., Zhao, B., Guo, R., Li, Y., Sun, L., Zeng, L., & Wei, C. (2026). Influence of Particle Size Distribution of Coal Gangue on Performance of Prepared Ceramsite. Materials, 19(15), 3212. https://doi.org/10.3390/ma19153212

Vancouver

Guan H, Zhao B, Guo R, Li Y, Sun L, Zeng L, et al. Influence of Particle Size Distribution of Coal Gangue on Performance of Prepared Ceramsite. Materials. 2026;19(15):3212. doi:10.3390/ma19153212

BibTeX
@article{Guan2026,
  author = {Guan, Hao and Zhao, Baoqiang and Guo, Ruidong and Li, Yu and Sun, Lifeng and Zeng, Lingdong and Wei, Chaohui},
  title = {Influence of Particle Size Distribution of Coal Gangue on Performance of Prepared Ceramsite},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3212},
  doi = {10.3390/ma19153212}
}
Kostenlos starten →