EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of ER:YAG Laser Irradiation on the Load-Bearing Capacity and Reliability of All-Ceramic Zirconia Crowns

Natália Piffer Pasquali, Patrícia Moreira de Freitas iD, Márcia Borba iD, Paula Benetti iD

Materials · 27.07.2026 · 19 (15) · 3196

DOI: 10.3390/ma19153196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.07.2026. Verfasst von Natália Piffer Pasquali und 3 weiteren Autor:innen. Beteiligte Einrichtung: Post-Graduation Program in Dentistry, University of Passo Fundo (UPF), Passo Fundo 99052-900, RS, Brazil. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação de Amparo à Pesquisa do Estado de São Paulo, FAPESP.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

This study evaluated the effect of Erbium:Yttrium–Aluminum–Garnet (Er:YAG) laser irradiation on the fracture load, failure mode, and reliability of monolithic and porcelain-veneered zirconia crowns.

Methods

Monolithic ultra-translucent zirconia crowns (5YZ-M, n = 30) and porcelain-veneered zirconia crowns (3YZ-V, n = 30) were divided into control (Ctrl-no surface treatment) and Er:YAG laser irradiation (Las) groups (n = 15). Las was performed on the cementation surface (250 mJ, 10 Hz, 2.5 W for 30 s). Crowns were adhesively cemented onto dentin-analog abutments and subjected to compressive load-to-failure testing. Data were analyzed by two-way ANOVA, Tukey’s post hoc test, and Weibull analysis (α = 0.05). Fractographic analysis was performed.

Results

Laser irradiation did not affect the fracture load (p = 0.183). Monolithic crowns (5YZ-M) showed significantly higher fracture load than veneered crowns (3YZ-V) (p < 0.001). There was no effect of the interaction between factors (p = 0.150). The m-values were similar among groups, while the L0 of 3YZ-V-Ctrl was significantly lower than that of 5YZ-M. Veneered restorations predominantly showed chipping and delamination; whereas, monolithic crowns mainly exhibited catastrophic failures. Fracture origins were mostly located at the occlusal loading area.

Conclusions

Er:YAG laser irradiation of the cementation surface did not affect the load-bearing capacity or structural reliability of zirconia crowns.

Schlagwörter

Stichwörter der Autor:innen

ceramicscompression fracturedental porcelainmechanical testing

Autor:innen und Institutionen

  • Post-Graduation Program in Dentistry, University of Passo Fundo (UPF), Passo Fundo 99052-900, RS, Brazil.
  • Special Laboratory of Lasers in Dentistry (LELO), School of Dentistry-USP, São Paulo 05508-000, SP, Brazil.
  • Division of Dentistry, School of Medical Science, The University of Manchester, Manchester M13 9PL, UK.

ORCID-Profile: Patrícia Moreira de Freitas, Márcia Borba, Paula Benetti

Förderung

  • Fundação de Amparo à Pesquisa do Estado de São Paulo
  • FAPESP

Zitieren

APA

Pasquali, N. P., Freitas, P. M., Borba, M., & Benetti, P. (2026). Effect of ER:YAG Laser Irradiation on the Load-Bearing Capacity and Reliability of All-Ceramic Zirconia Crowns. Materials, 19(15), 3196. https://doi.org/10.3390/ma19153196

Vancouver

Pasquali NP, Freitas PM, Borba M, Benetti P. Effect of ER:YAG Laser Irradiation on the Load-Bearing Capacity and Reliability of All-Ceramic Zirconia Crowns. Materials. 2026;19(15):3196. doi:10.3390/ma19153196

BibTeX
@article{Pasquali2026,
  author = {Pasquali, Natália Piffer and Freitas, Patrícia Moreira de and Borba, Márcia and Benetti, Paula},
  title = {Effect of ER:YAG Laser Irradiation on the Load-Bearing Capacity and Reliability of All-Ceramic Zirconia Crowns},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3196},
  doi = {10.3390/ma19153196}
}
Kostenlos starten →