EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties and Carbon Emission Characteristics of Loess Stabilized with Multi-Source Solid Waste Cementitious Materials

Bentian Yu iD, Yuting Cai, Leyu Niu, Hao Wang, Dongze Xia, Xinzhu Li

Materials · 26.07.2026 · 19 (15) · 3191

DOI: 10.3390/ma19153191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.07.2026. Verfasst von Bentian Yu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Gansu Provincial Science and Technology Department, Gansu Education Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the high carbon emissions generated during the production of cement, lime, and other traditional soil stabilizers and to promote the resource utilization of industrial solid waste, this study proposed a low-carbon loess stabilization scheme using tuff powder (TP), fly ash (FA), and ground granulated blast-furnace slag (GGBS) activated by alkaline solutions to fully substitute conventional cement and lime. A series of macroscopic tests, including unconfined compressive strength, water immersion, and triaxial shear tests, were carried out on stabilized loess. Combined with microcharacterization including X-ray diffraction (XRD), scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) spectroscopic testing, this study systematically evaluated the mechanical performance, water stability, and microstructural evolution of stabilized loess and quantified its global warming potential (GWP). Macroscopic test results reveal that the composite binder consisting of 15% multi-source solid waste (TP:FA:GGBS) = (1:1:3), 3% NaOH, and 3.2% Na2SiO3 (relative to solid waste mass) delivers the optimal comprehensive performance of stabilized loess. Alkali activation significantly accelerates early strength development, and both compressive and shear strengths are markedly improved compared with samples treated solely with solid waste. Furthermore, decreasing the activator modulus further enhances mechanical properties and water resistance. Microscopic characterizations demonstrate that alkali activation stimulates the pozzolanic reaction of active components in solid waste, generating cementitious gels that bind soil particles and unreacted solid waste to form dense network matrices. As a fine filler, TP also acts as a nucleation sites for hydration product crystallization, which facilitates the formation of cementitious phases.

Schlagwörter

Stichwörter der Autor:innen

alkali activationcarbon emissionsimprovement mechanismmechanical propertiesmulti-source solid wastestabilized loess

Autor:innen und Institutionen

  • School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China.
  • School of Engineering, Cardiff University, Cardiff CF24 3AA, UK.
  • Lanzhou Center for Disease Control and Prevention, Lanzhou 730030, China.

ORCID-Profile: Bentian Yu

Förderung

  • National Natural Science Foundation of China
  • Gansu Provincial Science and Technology Department
  • Gansu Education Department

Zitieren

APA

Yu, B., Cai, Y., Niu, L., Wang, H., Xia, D., & Li, X. (2026). Mechanical Properties and Carbon Emission Characteristics of Loess Stabilized with Multi-Source Solid Waste Cementitious Materials. Materials, 19(15), 3191. https://doi.org/10.3390/ma19153191

Vancouver

Yu B, Cai Y, Niu L, Wang H, Xia D, Li X. Mechanical Properties and Carbon Emission Characteristics of Loess Stabilized with Multi-Source Solid Waste Cementitious Materials. Materials. 2026;19(15):3191. doi:10.3390/ma19153191

BibTeX
@article{Yu2026,
  author = {Yu, Bentian and Cai, Yuting and Niu, Leyu and Wang, Hao and Xia, Dongze and Li, Xinzhu},
  title = {Mechanical Properties and Carbon Emission Characteristics of Loess Stabilized with Multi-Source Solid Waste Cementitious Materials},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3191},
  doi = {10.3390/ma19153191}
}
Kostenlos starten →