EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Li+ Elution and Adsorption by Tannin-Modified Hydrophilic-H2TiO3 Titanium–Lithium Ion Sieve

Xia-Zhong Zhang, Guang-Ming Cheng, Shu-Ying Liu, Ke-Jie Wang, Lei-Lei Wang, Li-Yuan Zhang iD, Hong-Bo Li, Ting-Xing Zhao

Materials · 25.07.2026 · 19 (15) · 3181

DOI: 10.3390/ma19153181 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.07.2026. Verfasst von Xia-Zhong Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang 621010, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Sichuan Province, Sichuan Province College Students Innovation and Entrepreneurship Training Program, Natural Science Foundation of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tannin-modified Li2TiO3 powders (TA-Li2TiO3) were prepared by a precipitation-peptization process with titanium sulfate as the titanium source, lithium acetate as the lithium source, ammonia as the precipitator, and hydrogen peroxide as the complexing agent. The effects of the tannin addition ratio and the calcination temperature on the crystal structure and surface morphology of TA-Li2TiO3 were studied. After pickling TA-Li2TiO3 with diluted hydrochloric acid, TA-H2TiO3 was obtained. Its elution behavior and lithium adsorption performance were studied and the adsorption isotherm and kinetics were investigated. The results indicated that the crystal structure was well-defined, and a uniform mesoporous surface morphology was observed on the sample surface with a calcination temperature of 750 °C and a tannin addition ratio of 1 g:1 L. The specific surface area was increased by 15.1 m2/g compared with the unmodified one, and the hydrophilicity of the TA-H2TiO3 significantly improved. After elution with 0.2 mol/L hydrochloric acid for 8 h, the elution equilibrium was achieved, the lithium elution ratio reached 98.15% and the lithium adsorption capacity reached 39.13 mg/g, which were significantly higher than that of the unmodified one. The adsorption isotherm is more consistent with the Langmuir model, the adsorption kinetics follows the pseudo second order model, and the adsorption mechanism is chemical monolayer adsorption.

Schlagwörter

Stichwörter der Autor:innen

adsorptionelutionhydrophilicityprecipitation-peptization processtannintitanium–lithium ion sieve

Autor:innen und Institutionen

  • School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang 621010, China.
  • School of Chemical and Environmental Engineering, Neijiang Normal University, Neijiang 641112, China.
  • Special Agricultural Resources in Tuojiang River Basin Sharing and Service Platform of Sichuan Province, Neijiang 641112, China.
  • State Key Laboratory of Environment-Friendly Energy Materials, Mianyang 621010, China.

ORCID-Profile: Li-Yuan Zhang

Förderung

  • Science and Technology Department of Sichuan Province
  • Sichuan Province College Students Innovation and Entrepreneurship Training Program
  • Natural Science Foundation of Sichuan Province

Zitieren

APA

Zhang, X. Z., Cheng, G. M., Liu, S. Y., Wang, K. J., Wang, L. L., Zhang, L. Y., Li, H. B., & Zhao, T. X. (2026). Enhanced Li+ Elution and Adsorption by Tannin-Modified Hydrophilic-H2TiO3 Titanium–Lithium Ion Sieve. Materials, 19(15), 3181. https://doi.org/10.3390/ma19153181

Vancouver

Zhang XZ, Cheng GM, Liu SY, Wang KJ, Wang LL, Zhang LY, et al. Enhanced Li+ Elution and Adsorption by Tannin-Modified Hydrophilic-H2TiO3 Titanium–Lithium Ion Sieve. Materials. 2026;19(15):3181. doi:10.3390/ma19153181

BibTeX
@article{Zhang2026,
  author = {Zhang, Xia-Zhong and Cheng, Guang-Ming and Liu, Shu-Ying and Wang, Ke-Jie and Wang, Lei-Lei and Zhang, Li-Yuan and Li, Hong-Bo and Zhao, Ting-Xing},
  title = {Enhanced Li+ Elution and Adsorption by Tannin-Modified Hydrophilic-H2TiO3 Titanium–Lithium Ion Sieve},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3181},
  doi = {10.3390/ma19153181}
}
Kostenlos starten →