EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Research Progress on Low-Carbon Ironmaking Technologies for China’s Iron and Steel Industry Under the Carbon Peaking and Carbon Neutrality Goals

Wenwen Liu, Renjie Zhang, Haokun Li, Yuanhong Qi

Materials · 23.07.2026 · 19 (15) · 3163

DOI: 10.3390/ma19153163 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 23.07.2026. Verfasst von Wenwen Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Advanced Iron and Steel Processes and Products, Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 164 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under China’s “carbon peaking before 2030 and carbon neutrality before 2060” targets, the low-carbon transformation of the ironmaking stage—which contributes approximately 70% of the CO2 emitted per ton of steel in the dominant blast furnace–basic oxygen furnace (BF–BOF) route—is decisive for decarbonizing the steel industry. In contrast to earlier reviews that describe individual technologies in isolation, this review provides a structured, cross-technology synthesis: the main routes are classified into short-/medium-term low-carbon blast furnace technologies (hydrogen-rich carbon-recycling oxygen blast furnace, hydrogen-rich injection, biomass char injection and ultimate energy-efficiency measures) and medium-/long-term non-blast furnace technologies (hydrogen-based shaft furnace direct reduction, smelting reduction, rotary hearth furnace, fluidized-bed reduction and electric smelting reduction) and are then compared on a common set of quantitative indicators—CO2 mitigation, specific energy and hydrogen demand, technology readiness level (TRL) and relative cost. On this basis, emerging hydrogen-based flash ironmaking, developed from the interdisciplinary integration of “iron and steel–non-ferrous metallurgy–hydrogen metallurgy–plasma”, is critically assessed, with a clear separation between laboratory/pilot feasibility and industrial readiness. We conclude that low-carbon blast furnace technologies, owing to low retrofit cost and high maturity, will dominate near-term mitigation, whereas hydrogen-based shaft furnaces and, in the longer term, hydrogen-based flash ironmaking define the pathway toward near-zero-carbon ironmaking—conditional on the availability of green hydrogen and low-carbon electricity and on overcoming key engineering barriers.

Schlagwörter

Stichwörter der Autor:innen

blast furnace transformationcarbon neutralityhydrogen metallurgyhydrogen-based flash ironmakinghydrogen-based shaft furnacelow-carbon ironmakingnon-blast furnace ironmakingsmelting reduction

Autor:innen und Institutionen

  • State Key Laboratory for Advanced Iron and Steel Processes and Products, Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China.
  • Technology Center, Taiyuan Iron and Steel (Group) Co., Ltd., Taiyuan 030003, China.
  • Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China.

Zitieren

APA

Liu, W., Zhang, R., Li, H., & Qi, Y. (2026). Research Progress on Low-Carbon Ironmaking Technologies for China’s Iron and Steel Industry Under the Carbon Peaking and Carbon Neutrality Goals. Materials, 19(15), 3163. https://doi.org/10.3390/ma19153163

Vancouver

Liu W, Zhang R, Li H, Qi Y. Research Progress on Low-Carbon Ironmaking Technologies for China’s Iron and Steel Industry Under the Carbon Peaking and Carbon Neutrality Goals. Materials. 2026;19(15):3163. doi:10.3390/ma19153163

BibTeX
@article{Liu2026,
  author = {Liu, Wenwen and Zhang, Renjie and Li, Haokun and Qi, Yuanhong},
  title = {Research Progress on Low-Carbon Ironmaking Technologies for China’s Iron and Steel Industry Under the Carbon Peaking and Carbon Neutrality Goals},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3163},
  doi = {10.3390/ma19153163}
}
Kostenlos starten →