EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Properties of CBN Abrasive Blocks with Cu-Sn-Ti Binder Modified by Ceramic Glass Powder

Huiju Zhang iD, Duanzhi Duan, Congcong Cao, Chunhui Li, Sumei Zheng

Materials · 23.07.2026 · 19 (15) · 3160

DOI: 10.3390/ma19153160 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.07.2026. Verfasst von Huiju Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: The Higher Educational Key Laboratory for Flexible Manufacturing Equipment Integration of Fujian Province, Xiamen Institute of Technology, Xiamen 361…. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory for Manufacturing Systems Engineering, Natural Science Foundation of Xiamen, China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu-Sn-Ti metallic-bonded CBN (Cubic Boron Nitride) abrasives are widely applied in the precision grinding of superhard materials. However, their high density and high toughness easily lead to poor grain protrusion and inadequate self-sharpening. In this work, ceramic glass powder was incorporated to modify the Cu-Sn-Ti binder, thereby fabricating composite-bonded CBN abrasive blocks with qualified mechanical properties and excellent self-sharpening performance. Flexural strength of abrasive blocks and microhardness of composite binders were measured; microstructure was characterized, phase composition was analyzed by XRD, and tribological tests were carried out between CBN blocks and silicon nitride abrasives. The results indicate that at glass powder contents of 2.94–10.22 wt%, the flexural strength of CBN blocks decreases by 32.5–89.4%, and binder microhardness reduces by 26.5–58.3%. At high brazing temperature, Ti and Cu from Cu-Sn-Ti alloy react with Si and Al in glass powder at the interface to form new phases including Ti2O3, Ti5Si3 and Ti(Cu,Al)2, which facilitates favorable interfacial bonding among the alloy matrix, glass phase and CBN grains. With increasing glass powder content, the strength decline gradually slows down. The overall wear resistance of abrasive blocks declines. SEM observations on worn CBN blocks and their composite binders reveal the formation of micropores within glass-containing binders, accompanied by a shift in the fracture mode of CBN abrasives upon glass powder addition. Comprehensive experimental analysis indicates that the No.3 sample with 8.33 wt% glass powder possesses the optimal overall performance.

Schlagwörter

Stichwörter der Autor:innen

CBN abrasivesCu-Sn-Ticomposite binderglass powderinterfacial bondingself-sharpeningwear resistance

Autor:innen und Institutionen

  • The Higher Educational Key Laboratory for Flexible Manufacturing Equipment Integration of Fujian Province, Xiamen Institute of Technology, Xiamen 361000, China.
  • State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
  • Xiamen Key Laboratory of Intelligent Fishery, Xiamen Ocean Vocational College, Xiamen 361000, China.

ORCID-Profile: Huiju Zhang

Förderung

  • State Key Laboratory for Manufacturing Systems Engineering
  • Natural Science Foundation of Xiamen, China
  • National Natural Science Foundation of China
  • Higher Educational Key Laboratory for Flexible Manufacturing Equipment Integration of Fujian Province (Xiamen Institute of Technology)
  • 2026 University-level Scientific Research Fund of Xiamen Institute of Technology

Zitieren

APA

Zhang, H., Duan, D., Cao, C., Li, C., & Zheng, S. (2026). Microstructure and Properties of CBN Abrasive Blocks with Cu-Sn-Ti Binder Modified by Ceramic Glass Powder. Materials, 19(15), 3160. https://doi.org/10.3390/ma19153160

Vancouver

Zhang H, Duan D, Cao C, Li C, Zheng S. Microstructure and Properties of CBN Abrasive Blocks with Cu-Sn-Ti Binder Modified by Ceramic Glass Powder. Materials. 2026;19(15):3160. doi:10.3390/ma19153160

BibTeX
@article{Zhang2026,
  author = {Zhang, Huiju and Duan, Duanzhi and Cao, Congcong and Li, Chunhui and Zheng, Sumei},
  title = {Microstructure and Properties of CBN Abrasive Blocks with Cu-Sn-Ti Binder Modified by Ceramic Glass Powder},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3160},
  doi = {10.3390/ma19153160}
}
Kostenlos starten →