Metal Recovery from Lunar Regolith via Deep Eutectic Solvent Electrolysis for In Situ Resource Utilization
Materials · 21.07.2026 · 19 (14) · 3120
DOI: 10.3390/ma19143120 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.07.2026. Verfasst von Vesna S Cvetković und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrochemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.
Abstract (Originalsprache)
Sustaining human presence on the Moon depends on access to strategic metals, which can be achieved by directly utilizing extraterrestrial resources through in situ resource utilization (ISRU). This study presents novel insights and preliminary results into a previously unexplored strategy for metals extraction from the lunar regolith simulant Lunar Mare Soil (LMS-1) using deep eutectic solvents (DESs). Based on inductively coupled plasma–optical emission spectrometry (ICP-OES) measurements, the solubility of major oxide components of the regolith, SiO2, Al2O3, TiO2, Cr2O3, MgO and FeOT, was investigated in ethaline (choline chloride:ethylene glycol, ChCl:EG) as well as reline (ChCl:Urea). Although both DESs enabled oxide dissolution, reline exhibited significantly higher dissolution efficiency, due to the additional hydrogen-bond donor sites, NH and CO groups from urea, as well as high chloride activity in the reline. Cyclic voltammetry (CV) and square wave voltammetry (SWV) revealed that dissolved metal species in the reline–regolith system undergo complex multivalent redox transitions. The equilibrium potentials of the metals were determined and correlated with the order in which the metals should be electrodeposited on the cathode from an electrolyte containing dissolved lunar regolith. Based on the data from electrochemical measurements, parameters for electrolysis were selected. At less negative overpotentials, the deposit consisted mainly of Si, while Al, Cr, and Fe, along with Si, were electrodeposited at more negative potentials. The results highlight the importance of considering the selective electrochemical extraction of metals from DESs using lunar regolith as the source.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrochemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia.
- CEOS UG, Ottobrunner Str. 33, 81737 Munich, Germany.
- IME Process Metallurgy and Metal Recycling, RWTH Aachen University, Intzestrasse 3, 52056 Aachen, Germany.
ORCID-Profile: Vesna S Cvetković, Nataša M Petrović, Ksenija Milicevic Neumann, Bernd Friedrich, Jovan N Jovićević
Förderung
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia
Zitieren
APA
Cvetković, V. S., Petrović, N. M., Milicevic Neumann, K., Friedrich, B., & Jovićević, J. N. (2026). Metal Recovery from Lunar Regolith via Deep Eutectic Solvent Electrolysis for In Situ Resource Utilization. Materials, 19(14), 3120. https://doi.org/10.3390/ma19143120
Vancouver
Cvetković VS, Petrović NM, Milicevic Neumann K, Friedrich B, Jovićević JN. Metal Recovery from Lunar Regolith via Deep Eutectic Solvent Electrolysis for In Situ Resource Utilization. Materials. 2026;19(14):3120. doi:10.3390/ma19143120
BibTeX
@article{Cvetkovi2026,
author = {Cvetković, Vesna S and Petrović, Nataša M and Milicevic Neumann, Ksenija and Friedrich, Bernd and Jovićević, Jovan N},
title = {Metal Recovery from Lunar Regolith via Deep Eutectic Solvent Electrolysis for In Situ Resource Utilization},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {3120},
doi = {10.3390/ma19143120}
}
EUVIMED