EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of RF Sputtering Pressure and Power on the Microstructure of Sb Thin Films

Sheyda Uc-Canche, Eduardo Camacho-Espinosa, Mariely Loeza-Poot iD, Ricardo Mis-Fernández iD, Eduardo Flores iD

Materials · 21.07.2026 · 19 (14) · 3119

DOI: 10.3390/ma19143119 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.07.2026. Verfasst von Sheyda Uc-Canche und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Física Aplicada, Centro de Investigación y de Estudios Avanzados CINVESTAV-Unidad Mérida, Mérida 97310, Mexico. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría de Ciencia, Humanidades, Tecnología e Innovación, Laboratorio Nacional de Nano y Biomateriales, Cinvestav-IPN within the projects FOMIX-Yucatán, SECIHTI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Antimony (Sb) thin films are critical precursors for next-generation chalcogenide-based optoelectronics. However, the synergistic effects of sputtering power and pressure on their growth dynamics are not yet fully understood. The objective of this study is to establish the conditions for controlling the growth process of Sb films. To this end, we systematically investigated the interplay between RF-Sputtering parameters and film functionality. Samples were deposited as ~800 nm-thick films using RF-Sputtering, varying the power (50–70 W) and working pressure (10–25 mTorr), followed by comprehensive structural (XRD), morphological (SEM), chemical (XPS), and electrical characterization. A critical power threshold of 60 W was identified for the amorphous-to-crystalline transition, at which the films adopt a rhombohedral phase. Increasing the power to 70 W triggered a significant texture redistribution toward the (104) plane and an increase in grain size from 40 nm to 110 nm. Consequently, electrical resistivity dropped by several orders of magnitude, reaching a minimum of ~10−4 Ω cm due to enhanced grain connectivity and reduced boundary scattering and the transition from semiconductor-type conductivity to metallic-type conductivity. XPS analysis confirmed that these variations are driven by microstructural evolution rather than chemical changes, as the films maintain a stable metallic character beneath a nanometric surface oxide. These findings establish a direct correlation between plasma conditions and material properties. This strategic framework supports the optimization of Sb-based precursor layers in high-efficiency thin-film technologies.

Schlagwörter

Stichwörter der Autor:innen

RF-Sputtering powerSb thin filmsmicrostructureworking pressure

Autor:innen und Institutionen

  • Departamento de Física Aplicada, Centro de Investigación y de Estudios Avanzados CINVESTAV-Unidad Mérida, Mérida 97310, Mexico.
  • División Industrial, Universidad Tecnológica Metropolitana, Mérida 97279, Mexico.
  • Departamento de Energías Renovables, Universidad Abierta y a Distancia de México, México City 03330, Mexico.

ORCID-Profile: Mariely Loeza-Poot, Ricardo Mis-Fernández, Eduardo Flores

Förderung

  • Secretaría de Ciencia, Humanidades, Tecnología e Innovación
  • Laboratorio Nacional de Nano y Biomateriales, Cinvestav-IPN within the projects FOMIX-Yucatán
  • SECIHTI

Zitieren

APA

Uc-Canche, S., Camacho-Espinosa, E., Loeza-Poot, M., Mis-Fernández, R., & Flores, E. (2026). Influence of RF Sputtering Pressure and Power on the Microstructure of Sb Thin Films. Materials, 19(14), 3119. https://doi.org/10.3390/ma19143119

Vancouver

Uc-Canche S, Camacho-Espinosa E, Loeza-Poot M, Mis-Fernández R, Flores E. Influence of RF Sputtering Pressure and Power on the Microstructure of Sb Thin Films. Materials. 2026;19(14):3119. doi:10.3390/ma19143119

BibTeX
@article{UcCanche2026,
  author = {Uc-Canche, Sheyda and Camacho-Espinosa, Eduardo and Loeza-Poot, Mariely and Mis-Fernández, Ricardo and Flores, Eduardo},
  title = {Influence of RF Sputtering Pressure and Power on the Microstructure of Sb Thin Films},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {3119},
  doi = {10.3390/ma19143119}
}
Kostenlos starten →