EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polystyrene-Templated Microstructure Engineering of Aerosol-Deposited WO3-x Films for Enhanced Hydrogen Sensing

Xin Zhang iD, Yuan-Bo Zhang iD, Jong-Min Oh iD, Jie Wei

Materials · 17.07.2026 · 19 (14) · 3079

DOI: 10.3390/ma19143079 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.07.2026. Verfasst von Xin Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences, Suzhou 215163, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Trade, Industry and Energy, National Research Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-performance hydrogen sensors are crucial for the safe operation of lithium-ion batteries with regard to thermal runaway monitoring, which has driven extensive research. In this work, in order to satisfy the urgent requirement of H2 sensors for lithium-battery safety monitoring, a polystyrene sacrificial phase was introduced to fabricate porous WO3-based sensing films with tunable oxygen stoichiometry. Through PAD (Powder Aerosol Deposition) followed by sintering in air at 500 °C, the pore structure and defect chemistry of WO3-x films were simultaneously regulated. Structural characterizations show that polystyrene can be completely removed during sintering without changing the main γ-WO3 phase, while interconnected pores are generated and the films evolve from near-stoichiometric WO3 toward oxygen-deficient WO3-x with increased oxygen-vacancy concentration. Meanwhile, the PAD-derived amorphous matrix encapsulated nanocrystalline is largely preserved, providing stable charge-transport pathways. The porous structure improves hydrogen diffusion and reaction accessibility, while bulk reduction and oxygen-vacancy enrichment enhance surface reactivity and charge transfer, together leading to improved H2 sensing performance. Among all samples, WP5 exhibits the best overall performance, achieving stable H2 detection over a wide range of 10 ppb to 20,000 ppm at 120 °C, together with extraordinary response. These results demonstrate that this strategy is an effective route for simultaneously engineering porosity and defect chemistry in WO3-x-based sensing films, and highlight the potential of Pd/PS–WO3-x sensors for lithium-ion battery thermal runaway warning.

Schlagwörter

Stichwörter der Autor:innen

hydrogen sensorlithium-ion battery safety monitoringnon-stoichiometric tungsten oxidepolystyrene sacrificial templatepowder aerosol deposition

Autor:innen und Institutionen

  • Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences, Suzhou 215163, China.
  • Department of Electronic Materials Engineering, Kwangwoon University, Seoul 01897, Republic of Korea.
  • School of Electronic and Information Engineering, Suzhou Polytechnic University, Suzhou 215104, China.
  • Suzhou Sanse Sensing Technology Co., Ltd., Suzhou 215000, China.

ORCID-Profile: Xin Zhang, Yuan-Bo Zhang, Jong-Min Oh

Förderung

  • National Research Foundation of Korea
  • Ministry of Trade, Industry and Energy
  • National Research Foundation
  • Korea Ministry of Trade, Industry and Energy

Zitieren

APA

Zhang, X., Zhang, Y. B., Oh, J. M., & Wei, J. (2026). Polystyrene-Templated Microstructure Engineering of Aerosol-Deposited WO3-x Films for Enhanced Hydrogen Sensing. Materials, 19(14), 3079. https://doi.org/10.3390/ma19143079

Vancouver

Zhang X, Zhang YB, Oh JM, Wei J. Polystyrene-Templated Microstructure Engineering of Aerosol-Deposited WO3-x Films for Enhanced Hydrogen Sensing. Materials. 2026;19(14):3079. doi:10.3390/ma19143079

BibTeX
@article{Zhang2026,
  author = {Zhang, Xin and Zhang, Yuan-Bo and Oh, Jong-Min and Wei, Jie},
  title = {Polystyrene-Templated Microstructure Engineering of Aerosol-Deposited WO3-x Films for Enhanced Hydrogen Sensing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {3079},
  doi = {10.3390/ma19143079}
}
Kostenlos starten →