Temperature-Based Design Method for Concrete Cone Failure Under Fire Conditions
Materials · 16.07.2026 · 19 (14) · 3071
DOI: 10.3390/ma19143071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.07.2026. Verfasst von Nicolas Pinoteau und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre Scientifique et Technique du Bâtiment (CSTB), 77447 Champs-sur-Marne, France. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hilti (Liechtenstein), Scientific and Technical Center for Building, HILTI Corporation.
Abstract (Originalsprache)
This paper introduces a temperature-based design method for determining the tensile concrete cone capacity of anchors subjected to fire exposure. Current prescriptive approaches, most notably Eurocode 2, rely solely on embedment depth and fire duration for fire exposure from one or more directions on one concrete face with and without edge effects. The purpose of this work is to develop a temperature-based design method for predicting tensile concrete cone failure of anchors under fire conditions. Through an experimental program, this study demonstrates that anchor capacity can be conservatively described by temperature associated with embedment depth. A parametric analysis on the influence of concrete strength, anchor group effect, edge effect, concrete cracking, anchor type and heating orientation on different concrete faces defines the scope of application of the design method. The proposed method incorporates measured temperature profiles, offering a more precise alternative to the existing design method in Eurocode 2 and enabling flexible design for different structural configurations and fire scenarios. Optimized design is enabled in comparison to the existing prescriptive method (EN 1992-4) exclusively based on embedment depth and fire duration. Research findings demonstrate that anchor capacity correlates strongly with the temperature at the effective embedment depth under varying conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre Scientifique et Technique du Bâtiment (CSTB), 77447 Champs-sur-Marne, France.
- Hilti Entwicklungsgesellschaft mbH, 86916 Kaufering, Germany.
- Hilti North America, Plano, TX 75024, USA.
- Hilti Corporation, 9494 Schaan, Liechtenstein.
ORCID-Profile: Kresimir Nincevic, Kenton McBride
Förderung
- Hilti (Liechtenstein)
- Scientific and Technical Center for Building
- HILTI Corporation
- CSTB
Zitieren
APA
Pinoteau, N., Nincevic, K., McBride, K., Regnier, K., Labbé, A., & Piccinin, R. (2026). Temperature-Based Design Method for Concrete Cone Failure Under Fire Conditions. Materials, 19(14), 3071. https://doi.org/10.3390/ma19143071
Vancouver
Pinoteau N, Nincevic K, McBride K, Regnier K, Labbé A, Piccinin R. Temperature-Based Design Method for Concrete Cone Failure Under Fire Conditions. Materials. 2026;19(14):3071. doi:10.3390/ma19143071
BibTeX
@article{Pinoteau2026,
author = {Pinoteau, Nicolas and Nincevic, Kresimir and McBride, Kenton and Regnier, Killian and Labbé, Antoine and Piccinin, Roberto},
title = {Temperature-Based Design Method for Concrete Cone Failure Under Fire Conditions},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {3071},
doi = {10.3390/ma19143071}
}
EUVIMED