EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Microstructure and Property Regulation of 18Ni350 Maraging Steel Fabricated by Selective Laser Melting and Its Corrosion Resistance to Molten Aluminum

Lei Zhang, Luwei Zeng, Zhong Zeng, Jiuzhang Li iD, Yanghui Jiang, Bing Yang iD

Materials · 14.07.2026 · 19 (14) · 3030

DOI: 10.3390/ma19143030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.07.2026. Verfasst von Lei Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Power & Mechanical Engineering, Wuhan University, Wuhan 430072, China. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Project of the National Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of different heat treatment processes on the microstructure and mechanical properties of 18Ni350 maraging steel manufactured by selective laser melting and the corrosion resistance of TiB2 ceramic coatings Electro-Spark-Deposited on its surface when immersed in high-temperature molten aluminum have been investigated in the present study. The microstructures and mechanical properties of the differently heat-treated samples were analyzed using various precision instruments. The results reveal that the as-built sample exhibits a microstructure composed of cellular and columnar dendritic grains. After solution treatment, the microstructure fully transforms into lath-like martensite. After direct aging treatment, the cellular structures diminish, while precipitates at grain boundaries proliferate with increasing aging temperature. SAT- treatment achieves full microstructural homogenization, featuring fine-lath martensite and a small amount of randomly distributed austenite particles. DA- and SAT- significantly improve the strength, hardness and modulus of samples and were found to reduce the toughness and plasticity. After solution treatment at 800 °C for 1 h followed by aging treatment at 520 °C for 6 h (SAT 800-520), the specimen achieved an UTS of 2476 MPa while maintaining an EL of 4.6%. The TiB2 coating and the Cr interlayer deposited via ESD form a continuous interfacial bond with the substrate, demonstrating favorable adhesion. After 4 h of static immersion in high-temperature molten aluminum, the coating remains intact without complete delamination, delivering effective protection to the substrate.

Schlagwörter

Stichwörter der Autor:innen

18Ni350 maraging steelElectro-Spark DepositionTiB2molten aluminum corrosion resistanceselective laser melting

Autor:innen und Institutionen

  • School of Power & Mechanical Engineering, Wuhan University, Wuhan 430072, China.

ORCID-Profile: Jiuzhang Li, Bing Yang

Förderung

  • Key Project of the National Natural Science Foundation of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, L., Zeng, L., Zeng, Z., Li, J., Jiang, Y., & Yang, B. (2026). Study on Microstructure and Property Regulation of 18Ni350 Maraging Steel Fabricated by Selective Laser Melting and Its Corrosion Resistance to Molten Aluminum. Materials, 19(14), 3030. https://doi.org/10.3390/ma19143030

Vancouver

Zhang L, Zeng L, Zeng Z, Li J, Jiang Y, Yang B. Study on Microstructure and Property Regulation of 18Ni350 Maraging Steel Fabricated by Selective Laser Melting and Its Corrosion Resistance to Molten Aluminum. Materials. 2026;19(14):3030. doi:10.3390/ma19143030

BibTeX
@article{Zhang2026,
  author = {Zhang, Lei and Zeng, Luwei and Zeng, Zhong and Li, Jiuzhang and Jiang, Yanghui and Yang, Bing},
  title = {Study on Microstructure and Property Regulation of 18Ni350 Maraging Steel Fabricated by Selective Laser Melting and Its Corrosion Resistance to Molten Aluminum},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {3030},
  doi = {10.3390/ma19143030}
}
Kostenlos starten →