Application of Mössbauer Spectroscopy to the Study of Iron Phase States in Products of Magnetization Roasting of Ferruginous Manganese Ore and Concentrate
Materials · 13.07.2026 · 19 (14) · 3017
DOI: 10.3390/ma19143017 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.07.2026. Verfasst von Alibek Baisanov und 5 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Pyrometallurgical Processes, Zh. Abishev Chemical-Metallurgical Institute, Karaganda 100009, Kazakhstan. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
Magnetization roasting followed by magnetic separation can upgrade ferruginous manganese raw materials, but its efficiency depends on the iron phase state after roasting. This study clarified the phase state and distribution of iron in magnetic and non-magnetic products obtained from ferruginous manganese ore and concentrate after magnetization roasting and dry magnetic separation. The materials were roasted at 600–650 °C using Shubarkol coal as a solid reducing agent and then separated at a magnetic field strength of 1.2 kOe. Chemical analysis, X-ray diffraction, and Mössbauer spectroscopy were used to relate separation results to iron phase states. The Mn/Fe ratio in the non-magnetic products increased from 3.92 to 10.87 for the ore and from 2.98 to 23.99 for the concentrate, while 76.25% and 88.26% of iron were transferred to the corresponding magnetic fractions. Mössbauer spectroscopy showed that magnetite-type spinel components, including Fe3O4 and substituted (Fe1−xMx)3O4, were mainly associated with the magnetic products. Hematite-like and paramagnetic Fe3+/Fe2+ components were also detected, indicating incomplete conversion of iron-bearing phases into magnetite-type spinels. The Mössbauer-area-weighted fraction of iron in magnetite-type spinel phases was 76.5% for the ore and 64.36% for the concentrate. These results explain the different separation behavior after roasting–magnetic treatment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Pyrometallurgical Processes, Zh. Abishev Chemical-Metallurgical Institute, Karaganda 100009, Kazakhstan.
- Laboratory of Metallurgical Melts, Zh. Abishev Chemical-Metallurgical Institute, Karaganda 100009, Kazakhstan.
ORCID-Profile: Nina Vorobkalo
Förderung
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Baisanov, A., Baisanov, S., Vorobkalo, N., Akuov, A., Samuratov, Y., & Mussina, I. (2026). Application of Mössbauer Spectroscopy to the Study of Iron Phase States in Products of Magnetization Roasting of Ferruginous Manganese Ore and Concentrate. Materials, 19(14), 3017. https://doi.org/10.3390/ma19143017
Vancouver
Baisanov A, Baisanov S, Vorobkalo N, Akuov A, Samuratov Y, Mussina I. Application of Mössbauer Spectroscopy to the Study of Iron Phase States in Products of Magnetization Roasting of Ferruginous Manganese Ore and Concentrate. Materials. 2026;19(14):3017. doi:10.3390/ma19143017
BibTeX
@article{Baisanov2026,
author = {Baisanov, Alibek and Baisanov, Sailaubai and Vorobkalo, Nina and Akuov, Askhat and Samuratov, Yerulan and Mussina, Inkar},
title = {Application of Mössbauer Spectroscopy to the Study of Iron Phase States in Products of Magnetization Roasting of Ferruginous Manganese Ore and Concentrate},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {3017},
doi = {10.3390/ma19143017}
}
EUVIMED