Ceramic-Processing Perspectives on Colloidal CIGS and CZTSSe Thin-Film Solar Absorbers: Green-Body Formation, Reactive Chalcogenization, and Defect Engineering
Materials · 10.07.2026 · 19 (14) · 2989
DOI: 10.3390/ma19142989 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 10.07.2026. Verfasst von Hsing-I Hsiang. Beteiligte Einrichtung: Department of Resources Engineering, National Cheng Kung University, Tainan 70101, Taiwan. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan (NSTC).
Abstract (Originalsprache)
Colloidal processing provides a scalable non-vacuum route for fabricating CIGS and CZTSSe thin-film absorbers, but nanoparticle-derived films should be treated as constrained particulate green bodies rather than as simple chemically deposited semiconductor layers. This review reorganizes colloidal chalcogenide photovoltaics using ceramic-processing concepts: ink dispersion, green-body packing, capillary drying stress, ligand burnout, constrained shrinkage, reactive chalcogenization, transient liquid-assisted coarsening, secondary-phase control, defect chemistry, and interface reactions. The central argument is that film densification and grain growth are necessary but insufficient for high-performance CZTSSe devices. Residual carbon, Sn loss, Cu/Zn disorder, ZnSe or Cu2−xSe secondary phases, excessive MoSe2, and nonideal absorber/buffer band alignment can dominate open-circuit-voltage loss, fill factor, and carrier collection even when the absorber appears dense in cross-sectional microscopy. By linking ceramic-processing variables to photovoltaic loss mechanisms, this review identifies practical routes for improving colloidal chalcogenide solar cells: controlled ligand exchange and binder burnout, high-green-density precursor design, moderated chalcogen chemical potential, transient liquid management, depth-resolved phase analysis, and integrated front/back-interface engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Resources Engineering, National Cheng Kung University, Tainan 70101, Taiwan.
ORCID-Profile: Hsing-I Hsiang
Förderung
- National Science and Technology Council, Taiwan (NSTC)
Zitieren
APA
Hsiang, H. I. (2026). Ceramic-Processing Perspectives on Colloidal CIGS and CZTSSe Thin-Film Solar Absorbers: Green-Body Formation, Reactive Chalcogenization, and Defect Engineering. Materials, 19(14), 2989. https://doi.org/10.3390/ma19142989
Vancouver
Hsiang HI. Ceramic-Processing Perspectives on Colloidal CIGS and CZTSSe Thin-Film Solar Absorbers: Green-Body Formation, Reactive Chalcogenization, and Defect Engineering. Materials. 2026;19(14):2989. doi:10.3390/ma19142989
BibTeX
@article{Hsiang2026,
author = {Hsiang, Hsing-I},
title = {Ceramic-Processing Perspectives on Colloidal CIGS and CZTSSe Thin-Film Solar Absorbers: Green-Body Formation, Reactive Chalcogenization, and Defect Engineering},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {2989},
doi = {10.3390/ma19142989}
}
EUVIMED