Enhancing Constitutive Description of 5A06 Aluminum Alloy During Warm Deformation Using Machine Learning-Assisted Johnson–Cook Model
Materials · 10.07.2026 · 19 (14) · 2987
DOI: 10.3390/ma19142987 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.07.2026. Verfasst von Zhao Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, No. 1037, Luoyu Road, Hongsha…. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Major Science and Technology Projects of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
To accurately characterize the warm deformation behavior and workability of the 5A06 aluminum alloy, this study presents an innovative workflow that develops and systematically validates machine learning-assisted Johnson–Cook (ML-JC) frameworks based on artificial neural network (ANN) surrogate models. Two predictive frameworks—the parallel-decoupled PD-ANN-JC and the multi-objective integrated MOI-ANN-JC—were constructed. Quantitatively, both developed ML-JC frameworks achieve significantly higher stress prediction accuracy and superior generalization capability compared with the conventional JC model. Specifically, on the testing set, the MOI-ANN-JC framework yields an average absolute relative error (AARE) of 1.424% and an R2 of 0.997, outperforming the PD-ANN-JC framework (AARE of 3.246%, R2 of 0.988). On the validation set, the MOI-ANN-JC framework also demonstrates exceptional generalization, with an AARE of 3.302% and an R2 of 0.987. Scientifically, the superior performance of the MOI-ANN-JC framework stems from its ANN-mnδ surrogate model, which simultaneously predicts the strain hardening exponent n, thermal softening exponent m, and relative error δ directly from deformation parameters. This mutual coupling establishes an intrinsic correlation between m and n, successfully aligning with the physical reality wherein strain hardening and thermal softening are inherently linked during deformation. Qualitatively and practically, by integrating the MOI-ANN-JC framework into finite element (FE) simulation software, dynamic tracking and visualization of the thermal softening exponent m during warm deformation were achieved. Combined with FE simulations, Vickers hardness testing and EBSD observations, this study successfully establishes a direct qualitative spatial correspondence between low-m regions and macroscopic defects, which was further verified through the warm forging of a thin-walled dual-cavity component. Crucially, this approach for evaluating deformation stability bridges the gap caused by the inapplicability of conventional processing maps within this temperature regime, offering a robust and broadly applicable workflow for complex forming optimization.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, No. 1037, Luoyu Road, Hongshan District, Wuhan 430074, China.
- School of Intelligent Manufacturing and Robotics, Shanghai DianJi University, No. 300, Shuihua Road, Pudong New District, Shanghai 201306, China.
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
Förderung
- National Major Science and Technology Projects of China
- National Natural Science Foundation of China
Zitieren
APA
Liu, Z., Deng, L., Long, J., Gao, C., Hao, Y., Gong, P., Tang, X., & Wang, X. (2026). Enhancing Constitutive Description of 5A06 Aluminum Alloy During Warm Deformation Using Machine Learning-Assisted Johnson–Cook Model. Materials, 19(14), 2987. https://doi.org/10.3390/ma19142987
Vancouver
Liu Z, Deng L, Long J, Gao C, Hao Y, Gong P, et al. Enhancing Constitutive Description of 5A06 Aluminum Alloy During Warm Deformation Using Machine Learning-Assisted Johnson–Cook Model. Materials. 2026;19(14):2987. doi:10.3390/ma19142987
BibTeX
@article{Liu2026,
author = {Liu, Zhao and Deng, Lei and Long, Jinchuan and Gao, Chang and Hao, Yi and Gong, Pan and Tang, Xuefeng and Wang, Xinyun},
title = {Enhancing Constitutive Description of 5A06 Aluminum Alloy During Warm Deformation Using Machine Learning-Assisted Johnson–Cook Model},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {2987},
doi = {10.3390/ma19142987}
}
EUVIMED