EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of Aluminum Alloy Substrate Material Using Wire-Laser Directed Energy Deposition Assisted with Liquid Nitrogen Cooling

Fawu Xiang, Ruihao Zhang, Tingqing Cheng, Likun Yang, Hui Gao, Yingying Huang, Haihe Jiang, Jiangang Wang

Materials · 09.07.2026 · 19 (14) · 2965

DOI: 10.3390/ma19142965 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.07.2026. Verfasst von Fawu Xiang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Science Island Branch, Graduate School of USTC, Hefei 230026, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HG Laser Engineering Co. Ltd., HG Laser Engineering Co. Ltd.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heat accumulation during wire-laser directed energy deposition (WL-DED) may cause the thermal softening of thin aluminum alloy substrates. In this study, a liquid nitrogen-assisted cooling platform was introduced to regulate the substrate temperature during WL-DED of a 6061 aluminum alloy substrate with 5356 aluminum alloy wire. The results show that substrate cooling can mitigate substrate softening, and −100 °C provides improved substrate-bottom hardness while maintaining acceptable bonding quality. The hardness variation is discussed in relation to reduced thermal exposure, grain-size variation, recrystallization behavior, and the possible retention of strengthening phases. This work establishes a preliminary basis for tailoring the local properties of thin aluminum alloy substrates in WL-DED. Since the substrate is not removed, but forms an integrated component of the final assembly along with the deposited material, its properties are critical to component performance. This integrated approach also enhances material utilization and streamlines production by eliminating substrate separation steps.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingaluminum alloycoaxial wire-laser systemliquid nitrogen cooling

Autor:innen und Institutionen

  • Science Island Branch, Graduate School of USTC, Hefei 230026, China.
  • Anhui Province Key Laboratory of Medical Physics and Technology, Institute of Health and Medical Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China.
  • HGTECH Co., Ltd., Wuhan 430223, China.
  • HG Laser Engineering Co., Ltd., Wuhan 430075, China.

Förderung

  • HG Laser Engineering Co. Ltd.
  • HG Laser Engineering Co. Ltd

Zitieren

APA

Xiang, F., Zhang, R., Cheng, T., Yang, L., Gao, H., Huang, Y., Jiang, H., & Wang, J. (2026). Microstructure and Mechanical Properties of Aluminum Alloy Substrate Material Using Wire-Laser Directed Energy Deposition Assisted with Liquid Nitrogen Cooling. Materials, 19(14), 2965. https://doi.org/10.3390/ma19142965

Vancouver

Xiang F, Zhang R, Cheng T, Yang L, Gao H, Huang Y, et al. Microstructure and Mechanical Properties of Aluminum Alloy Substrate Material Using Wire-Laser Directed Energy Deposition Assisted with Liquid Nitrogen Cooling. Materials. 2026;19(14):2965. doi:10.3390/ma19142965

BibTeX
@article{Xiang2026,
  author = {Xiang, Fawu and Zhang, Ruihao and Cheng, Tingqing and Yang, Likun and Gao, Hui and Huang, Yingying and Jiang, Haihe and Wang, Jiangang},
  title = {Microstructure and Mechanical Properties of Aluminum Alloy Substrate Material Using Wire-Laser Directed Energy Deposition Assisted with Liquid Nitrogen Cooling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {2965},
  doi = {10.3390/ma19142965}
}
Kostenlos starten →